Paper feed problems
Problems | Solutions | |
|
| |
Paper fails to feed | If paper doesn't move through the automatic | |
| feeder: | |
| 1 | Open the printer front cover. |
| 2 | Remove any obstructions inside the printer. |
| 3 | Close the printer front cover. |
| 4 | Press the Paper Feed button. |
|
|
|
Paper jam | 1 | Pull firmly on the paper to remove it. If you |
|
| cannot reach the paper because it is too far |
|
| into the printer, open the printer front cover |
|
| and pull the paper out from the front of the |
|
| printer. |
| 2 | Close the printer front cover. |
| 3 | Resend your print job. Start with the page on |
|
| which the paper jam occurred. |
|
| |
Paper skews or | If paper skews or buckles while moving through | |
buckles | the printer, make sure: | |
| • | You do not force the paper down into the |
|
| printer when you load it. |
| • | There is not too much paper in the automatic |
|
| feeder. Depending on the thickness of your |
|
| paper, the automatic feeder can hold up to 100 |
|
| sheets of paper. |
| • | The left paper guide does not cause the paper |
|
| to bow in the automatic feeder. |
| • | You are using the correct type of paper. |
| • | The left paper guide is against the side of the |
|
| paper. |
| • | The printer is on a flat, level surface. |
|
|
|
Troubleshooting
Troubleshooting 57