Kodak C 750 manual Unloading the Film, Automatic rewind, Mid-roll change MRC

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds the film into the cassette after the last exposure.

1.Wait for the film to completely rewind into the film cassette and for the motor to stop running.

•When the motor stops running, the frame counter (37) indicates “0” on the LCD panel (14).

2.Rotate the film-door lever (10) to open the film door (18).

•The FSI on the fully-exposed film cassette is at ✖ (#3 position) and the frame counter indicates “E” on the LCD panel.

Mid-roll change (MRC)

You can remove your film in mid-roll and later reload it and continue picture-taking. The Film Status Indicator (FSI) on a partially exposed film cassette is set

to ◗ (#2 position). When you reload the film cassette into the camera, the camera automatically advances the film to the first unexposed frame. Film can be rewound and reloaded until the last picture is taken. The camera automati-

3.Remove the film cassette from the camera and reload with new KODAK ADVANTIX Film.

	3	4
2		1

cally rewinds the film and sets the FSI to ✖ (#3 position) when the last picture is taken.

27