JVC TK-C625 manual Manual PAN Limit Setup, Select a camera. ARM-P2580AINSTRUCTIONSB

32 Setting Up the Camera Using RM-P2580 (continued)

EN

MANUAL PAN LIMIT Setup

This section describes procedures for setting the Panning

MENU button
	SET button						PAN lever
		CAMERA button
						REMOTE CONTROL UNIT RM-P2580
SETUP		CAMERA			POSITION
		POWER
MENU	SET	ALARM				AUTO	F-1	F-2	F-3
		KEY LOCK
	LENS		CAMERA/POSITION					PAN/TILT
	SPEED	1	2	3	CAMERA	POSI-
						TION

CLOSE	IRIS	OPEN	4	5	6	OPTION	OPTION
						1	2
NEAR	FOCUS	FAR	7	8	9	AUTO	AUTO
	AF
						PAN	PATROL
WIDE	ZOOM	TELE	CLEAR	0	ENTER
				/HOME

Numeric ENTER

keys button

CAMERA FUNCTION2

FLIP	OFF
VAR. P / T SPEED	ON
EASY AF	OFF
AF FOR IR	OFF
TILT LIMIT
M. PAN LIMIT..	ON
AUTO RETURN..

<MENU> RETURN <SET> SUB MENU

CAMERA FUNCTION 2 Screen

M. PAN LIMIT POS.SET

[ L ]POS.SETTING →

<SET> INVALID

DURING PAN MOVEMENT

<MENU> RETURN <SET> L / R

M. PAN LIMIT POS.SET Screen (Left Limit)

M. PAN LIMIT POS.SET

← [ R ]POS.SETTING

<SET> INVALID

DURING PAN MOVEMENT

<MENU> RETURN <SET> L / R

(horizontal) range during manual operation.

1Select a camera. (ARM-P2580AINSTRUCTIONSB)

CAMERA buttonNNumeric key (Camera Number)NENTER button

●Video images of the selected camera will be output.

2MENU screen display. (A pg. 21, steps 2 to 4)

MENU button (3 sec.) N Select ACAMERA..B using the PAN lever N SET button.

●The AMENUB screen will be displayed.

3Move the PAN lever upward/downward to shift the cursor (E) to the ACAM. FUNCTION 2..B item, followed by pressing the

SET button.

●The ACAMERA FUNCTION 2B screen will be displayed.

4Shift the cursor (E) to the AM. PAN LIMIT..B item, and move the PAN lever leftward/rightward to select AONB.

5Press the SET button.

●The AM. PAN LIMIT POS.SETB screen (left limit) will be displayed.

6Set the position for the left limit.

Use the PAN lever to determine the position for the left limit.

●During setting, a message indicating A[L] POS. SETTING NB will be displayed at the bottom left of the screen.

7Press the SET button.

●The screen will switch to the right limit setting screen.

8Set the position for the right limit.

Use the PAN lever to determine the position for the right limit.

●During setting, a message indicating AO [R] POS. SETTINGB will be displayed at the bottom right of the screen.

9Press the MENU button.

●This stores the limit positions that have been set and returns the screen to the ACAMERA FUNCTION 2B menu.

MEMO

●Tilting , zooming and focusing operations are possible when this menu is displayed.

●If a pan limit has already been set, the camera will move to the left pan limit position when this menu is invoked.

●Setting cannot be performed when Panning is in progress. Press the SET button after Panning has come to a stop.

●Auto Flip operation will override this setting if the destination position of Auto Flip is outside the range as set in this item.

●Manual Pan Limit remains valid when setting preset positions.

●Movement to preset positions will be performed without regard to the Manual Pan Limit.

●The AM. PAN LIMIT..B item will not affect the following even when it is set to AONB.

•PRIVATE MASK Settings

•AUTO PAN POSITION Settings

•AREA DISPLAY Settings

M. PAN LIMIT POS.SET Screen (Right Limit)