30 EN | MEMORY CARD PLAYBACK (cont.) |
MENU/BRIGHT Wheel
Power Switch
Lock Button
Display
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
MENU
PROTECT CURRENT
PROT . ALL
CANC . ALL
RETURN
PROTECT
PROTECTED
VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
Menu Screen
PROTECT Screen
Protecting Files
The Protect mode helps prevent the accidental erasure of files.
1 Load a memory card ( pg. 14).
2 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
• A stored image is displayed.
3 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “PROTECT”, then press it.
4 Rotate the MENU/BRIGHT wheel to select the desired mode.
CURRENT : Protects the currently displayed image file.
PROT.ALL : Protects all image files stored on the memory card.
5 Press the MENU/BRIGHT wheel in. The PROTECT Screen appears.
•If you selected “CURRENT” in step 4, press 2or 3to select the desired file.
6 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it.
• To cancel protection, select “RETURN”.
NOTES:
●If the “ ” mark appears, the currently displayed file is protected.
●When the memory is initialized or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
4 Rotate the MENU/BRIGHT wheel to select the desired mode.
CURRENT : Removes protection from the currently displayed image file.
CANC.ALL : Removes protection from all image files stored on the memory card.
5 Press the MENU/BRIGHT wheel in. The PROTECT Screen appears.
•If you selected “CURRENT”, press 2or 3to select the desired file.
6 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it.
• To cancel selection, select “RETURN”.
RETURN