JVC GR-DVL522 specifications Indications

Page 85

Warning Indications

Indications

CHECK TAPE’S ERASE

PROTECTION TAB

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

TAPE!

TAPE END

DIFFERENT

FORMATTED TAPE

SET DATE/TIME!

LENS COVER

A. DUB ERROR!

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

EN 85

Function

Displays the battery remaining power. Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.( pg. 12)

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “ AUTO ” or “ MANUAL ” and the VIDEO/MEMORY Switch is set

to “VIDEO”.

( pg. 12)

Appears if dirt is detected on the heads during recording or playback.

Use an optional cleaning cassette.

( pg. 76)

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or

SNAPSHOT Button is pressed while the Power Switch is set to “

AUTO

” or

 

MANUAL

” and the VIDEO/MEMORY Switch is set to “VIDEO”.

 

 

 

 

 

 

Appears when the tape ends during recording or playback.

( pg. 67)

Appears if a tape in another format is loaded when the VIDEO/MEMORY Switch is set to “VIDEO”.

Appears when the date/time is not set.

( pg. 11)

Appears when the built-in clock battery runs out and the previously set date/time is erased. Consult your nearest JVC dealer for replacement.

Appears for 5 seconds after power is turned on if the lens cap is attached.

Appears if Audio Dubbing is attempted on a blank portion of a tape.

( pg. 63)

Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 63)

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio. ( pg. 63)

Appears if A. DUB (e) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

( pg. 63)

CONTINUED ON NEXT PAGE

Image 85
Contents GR-DVL522 It is recommended that you Dear CustomerImportant Product Safety Instructions Before recording an important scene Battery Pack AC Adapter AP-V10U, AP-V11U or AP-V12U Remote ControlCD-ROM Lock Button How To Attach The Lens CapGetting Started Charging the Battery Pack PowerBattery pack Charging time To Detach The Battery PackUsing AC Power Using the Battery PackAbout Batteries Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentSet the Power Switch to Date/Time SettingsMENU/BRIGHT Wheel Power Lamp Lock Button Display12 EN Approximate recording time Tape Recording modeLoading/Unloading a Cassette Set the tape recording mode depending on your preference Recording Mode SettingMenu Screen Sub Menu14 EN Picture Quality/Image Size SettingLoading a Memory Card To Unload a Memory CardTape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording To Stop RecordingPower Switch Position Operation ModeVIDEO/MEMORY Switch Position Journalistic Shooting18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dim20 EN When a blank portion is recorded on a tapeTime Code Proper recordingNormal Playback To Control The Speaker VolumeConnections 22 ENIf using a VCR . . . go to step If not . . . go to step 24 EN To cancel Blank Search midwayBlank Search PressMemory Card 26 EN SwitchBasic Shooting Snapshot Press SNAPSHOT. Photo appears whileTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardImage Size/Picture SD Memory Card MultiMediaCard Quality Auto Playback 28 ENViewing File Information Index PlaybackRemoving On-Screen Display 30 EN MENU/BRIGHT Wheel Power Switch Lock Button DisplayProtecting Files To Remove ProtectionMENU/BRIGHT Wheel Power Switch Lock Button To cancel deletion, select ReturnDeleting Files Display Menu Screen32 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Print by Selecting Still Images NO. of Prints To Reset The No. Of PrintsFast-Forward 3 Button Rewind Button MENU/BRIGHT Wheel Display Dpof ScreenMaking a New Folder 34 ENInitializing a Memory Card Folder and File namesAdvanced Features 36 EN To Deactivate The Selected ModeNight-Alive Program AE With Special EffectsSnow ShutterSpotlight TwilightFade/Wipe Effects 38 ENTo Deactivate The Selected Effect Fader And Wipe Menu 40 EN Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo obtain correct focus While focusing on a nearer subjectFocus detection zone SubjectExposure Control 42 ENIris Lock Manual White Balance Operation White Balance AdjustmentCloud HalogenFor Recording Menu 44 ENWIPE/FADER Program AEMenu Screen Explanations 46 EN Reset Execute CAM CancelSystem Display Demo OFF48 EN Following procedure applies to all except Synchro Comp  pgFor Playback Menu Display Playback Sound50 EN Connector cover Power Switch To AVDubbing To a VCR Engage the VCR’s AUX and Record-Pause modesTo use this camcorder as a player VIDEO/MEMORY Switch To DVLock ButtonTo DV OUT Video unit equipped with DV output connector VIDEO/MEMORY Switch52 EN Press the Recording Start/Stop Button on thisPlay/Pause Button 4/6 Wheel Lock Button Display Menu Screen54 EN Installing The BatteriesSwitch set to the camera Set to Play With the camcorder’s Power SwitchTo allow frame-by-frame search during tape playback 56 ENTo allow you to add creative effects to the playback image MenuLeft Button Up ButtonRight Button Stop Normal playback Press TSET REMOTE/VCR Code 58 ENVCR Recording deck Connect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pgSelect Scenes 60 ENRandom Assemble Editing Menu appears Editing Menu Automatic Editing to VCR62 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgTo hear the dubbed sound during playback Insert Editing 64 ENUsing DV cable Using USB cableConnector Power Switch Core filter To DV66 EN When a cassette at its end is loaded 95F C to 25C 68F to 77F is the ideal temperature range forCassette holder opens. Do not use force Recedes completely before closing the cassette holder coverSET DATE/TIME! appears Date/time is not set 68 ENOr OFF To Video There is no picture10X optical zoom is selected Set Zoom to 40X or 700X Find a white subject and composeTo Memory Video  pg70 EN Set the VIDEO/MEMORY LCD monitor image is 72 ENDistorted Times, please consult your nearest Repeat the above two or threeJVC dealer  pg this can be avoided74 EN Cleaning The CamcorderAfter Use Using Household AC Plug Adapter 76 EN Serious malfunctioning About moisture condensationDeclaration of Conformity Model Number Trade Name78 EN Standard FineUSB Edit$ % 80 ENPower Switch OPEN/EJECT Switch  pgVIDEO/MEMORY Switch Video Light Switch  pgIndex Indications 82 EN1024 # @ Appears when the Power Switch is set to84 EN Blank Search VolumeLCD Monitor/Viewfinder Indications During Tape Playback 116 21Indications 86 EN  pg , 9 Backlight CompensationChannels Left/Right Darken The LCD MonitorWhite Balance Unload a TapeSee previous page as well