JVC GR-DVL522 Using USB cable, Using DV cable, To USB, Connector, Power Switch Core filter To DV

Page 65

SYSTEM

CONNECTIONS

 

EN 65

[A] Using USB cable

 

 

 

To USB

USB cable

To USB

 

 

(provided)

connector

 

 

 

 

 

 

PC

[B] Using DV cable

OR

 

 

Power Switch

 

 

 

 

 

 

Core filter

Core filter

 

To DV

DV cable (optional)

To DV

 

IN/OUT

 

connector

 

 

 

PC with DV

 

 

 

connector

VIDEO/MEMORY Switch

 

 

(Open the LCD monitor to access this switch.)

 

Connection To A Personal Computer

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

•Only the still images stored on the memory card can be transferred to a PC.

4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Page 64 Page 66
Image 65
Page 64 Page 66
Contents GR-DVL522 It is recommended that you Dear CustomerImportant Product Safety Instructions Before recording an important scene CD-ROM AC Adapter AP-V10U, AP-V11U or AP-V12U Remote ControlBattery Pack Lock Button How To Attach The Lens CapGetting Started Charging the Battery Pack PowerBattery pack Charging time To Detach The Battery PackUsing AC Power Using the Battery PackAbout Batteries Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentSet the Power Switch to Date/Time SettingsMENU/BRIGHT Wheel Power Lamp Lock Button DisplayLoading/Unloading a Cassette Approximate recording time Tape Recording mode12 EN Set the tape recording mode depending on your preference Recording Mode SettingMenu Screen Sub Menu14 EN Picture Quality/Image Size SettingLoading a Memory Card To Unload a Memory CardTape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording To Stop RecordingPower Switch Position Operation ModeVIDEO/MEMORY Switch Position Journalistic Shooting18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dim20 EN When a blank portion is recorded on a tapeTime Code Proper recordingNormal Playback To Control The Speaker VolumeConnections 22 ENIf using a VCR . . . go to step If not . . . go to step 24 EN To cancel Blank Search midwayBlank Search PressMemory Card 26 EN SwitchBasic Shooting Snapshot Press SNAPSHOT. Photo appears whileImage Size/Picture SD Memory Card MultiMediaCard Quality To Protect Valuable Files available only for SD Memory CardTo Remove The Shutter Sound Auto Playback 28 ENRemoving On-Screen Display Index PlaybackViewing File Information 30 EN MENU/BRIGHT Wheel Power Switch Lock Button DisplayProtecting Files To Remove ProtectionMENU/BRIGHT Wheel Power Switch Lock Button To cancel deletion, select ReturnDeleting Files Display Menu Screen32 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Print by Selecting Still Images NO. of Prints To Reset The No. Of PrintsFast-Forward 3 Button Rewind Button MENU/BRIGHT Wheel Display Dpof ScreenMaking a New Folder 34 ENInitializing a Memory Card Folder and File namesAdvanced Features 36 EN To Deactivate The Selected ModeNight-Alive Program AE With Special EffectsSnow ShutterSpotlight TwilightTo Deactivate The Selected Effect 38 ENFade/Wipe Effects Fader And Wipe Menu 40 EN Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo obtain correct focus While focusing on a nearer subjectFocus detection zone SubjectIris Lock 42 ENExposure Control Manual White Balance Operation White Balance AdjustmentCloud HalogenFor Recording Menu 44 ENWIPE/FADER Program AEMenu Screen Explanations 46 EN Reset Execute CAM CancelSystem Display Demo OFFFor Playback Menu Following procedure applies to all except Synchro Comp  pg48 EN Display Playback Sound50 EN Connector cover Power Switch To AVDubbing To a VCR Engage the VCR’s AUX and Record-Pause modesTo use this camcorder as a player VIDEO/MEMORY Switch To DVLock ButtonTo DV OUT Video unit equipped with DV output connector VIDEO/MEMORY Switch52 EN Press the Recording Start/Stop Button on thisPlay/Pause Button 4/6 Wheel Lock Button Display Menu Screen54 EN Installing The BatteriesSwitch set to the camera Set to Play With the camcorder’s Power SwitchTo allow frame-by-frame search during tape playback 56 ENTo allow you to add creative effects to the playback image MenuLeft Button Up ButtonRight Button Stop Normal playback Press TVCR Recording deck 58 ENSET REMOTE/VCR Code Connect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pgRandom Assemble Editing Menu appears 60 ENSelect Scenes Editing Menu Automatic Editing to VCR62 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Insert Editing 64 ENUsing DV cable Using USB cableConnector Power Switch Core filter To DV66 EN When a cassette at its end is loaded 95F C to 25C 68F to 77F is the ideal temperature range forCassette holder opens. Do not use force Recedes completely before closing the cassette holder coverSET DATE/TIME! appears Date/time is not set 68 ENOr OFF To Video There is no picture10X optical zoom is selected Set Zoom to 40X or 700X Find a white subject and composeTo Memory Video  pg70 EN Set the VIDEO/MEMORY Distorted 72 ENLCD monitor image is Times, please consult your nearest Repeat the above two or threeJVC dealer  pg this can be avoidedAfter Use Cleaning The Camcorder74 EN Using Household AC Plug Adapter 76 EN Serious malfunctioning About moisture condensationDeclaration of Conformity Model Number Trade Name78 EN Standard FineUSB Edit$ % 80 ENPower Switch OPEN/EJECT Switch  pgVIDEO/MEMORY Switch Video Light Switch  pg1024 82 ENIndex Indications # @ Appears when the Power Switch is set to84 EN Blank Search VolumeLCD Monitor/Viewfinder Indications During Tape Playback 116 21Indications 86 EN  pg , 9 Backlight CompensationChannels Left/Right Darken The LCD MonitorSee previous page as well Unload a TapeWhite Balance
Top Page Image Contents