JVC GR-DVL522 System Display, Demo OFF, CAM Cancel, Reset Execute, Screen, Lcd/Tv, Date OFF

EN 47

SYSTEM

DISPLAY

DSC

DEMO	OFF	Automatic demonstration will not take place.
MODE
	ON	Demonstrates certain functions such as Program AE with special effects, etc.,
		and can be used to confirm how these functions operate.
		Demonstration starts in the following cases:

•When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

•With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes

after the Power Switch is set to “	” or “	” .
AUTO	MANUAL

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

●If a tape is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.

CAM	CANCEL	Does not reset all settings to the factory-preset.
RESET
	EXECUTE	Resets all settings to the factory-preset.
ON	LCD	Keeps the camcorder’s display (except the date, time and time code) from
SCREEN		appearing on the connected TV screen.
	LCD/TV	Makes the camcorder’s display appear on screen when the camcorder is
		connected to a TV.
DATE/	OFF	The date/time does not appear.
TIME
	AUTO	Displays the date/time for approx. 5 seconds in the following cases:
		• When the Power Switch is set from “OFF” to “	” or “	”.
		AUTO	MANUAL

•When tape playback starts. The camcorder displays the date/time when scenes are recorded.

•When the date is changed during tape playback.

	ON	The date/time is always displayed.
TIME	OFF	Time code is not displayed.
CODE
	ON	Time code is displayed on the camcorder and on the connected TV. Frame
		numbers are not displayed during recording.
CLOCK ADJ.		Allows you to set the current date and time ( pg. 11).
QUALITY		Refer to “Picture Quality/Image Size Setting”( pg. 14).
IMAGE SIZE
REC		When Snapshot recording is performed with the VIDEO/MEMORY Switch set
SELECT		to “VIDEO”, still images are recorded only onto the tape.

/When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in the CAMERA Menu is also applicable to memory card recording.

: Factory-preset

NOTES:

		MANUAL
● “	SYSTEM” and “	DISPLAY” functions which are set when the Power Switch is set to “	” are also applied

when the Power Switch is set to “PLAY”( pg. 48). “CLOCK ADJ.” only appears when the Power Switch is set to

MANUAL	”.
“
● Settings made in the “		DISPLAY” Menu remain effective even when the Power Switch is set to “		”. However,
			AUTO
the menu settings can be changed only when the Power Switch is set to “			”.
		MANUAL

● The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control ( pg. 23, 50, 59).