JVC GR-DVL522 specifications 46 EN

46 EN				USING MENUS FOR DETAILED ADJUSTMENT (cont.)
Menu Screen Explanations (cont.)
		TELE	OFF	Usually the distance to a subject where the lens is in focus depends on the
		MACRO		zoom magnification. Unless there is a distance more than 1m (3.3 ft.) to the
				subject, the lens is out of focus at the maximum telephoto setting. When set to
			ON	“ON”, you can shoot a subject as large as possible at a distance of approx. 60
				cm (2 ft.).
				• Depending on the zoom position, the lens may go out of focus.
		WIDE	OFF	Records with no change in the screen ratio. For playback on a TV with a
		MODE		normal screen ratio.
			CINEMA	Inserts black bands at the top and bottom of the screen. During playback on
	MANUAL			wide-screen TVs, the black bands at the top and bottom of the screen are cut
				the screen and the image appears like a letterboxed 16:9 movie.
				and the screen ratio becomes 16:9.	appears. When using this mode, refer
				to your wide-screen TV’s instruction manual. During playback/recording on 4:3
				TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of
				• The “CINEMA” mode is effective only when theVIDEO/MEMORY Switch is
				set to “VIDEO”.
			SQUEEZE	For playback on TVs with an aspect ratio of 16:9. Naturally expands the image
				to fit the screen without distortion.	appears. When using this mode, refer
				to your wide-screen TV’s instruction manual. During playback/recording on 4:3
				TVs/LCD monitor/viewfinder, the image is elongated vertically.

•The “SQUEEZE” mode is effective only when theVIDEO/MEMORY Switch is set to “VIDEO”.

		WIND			OFF	Disengages the function which cuts down on noise created by wind.
		CUT
					ON	Helps cut down on noise created by wind. “	” appears. The quality of the
						sound will change. This is normal.
		BEEP			OFF	Even though not heard while shooting, shutter sound is recorded on the tape.
	SYSTEM				BEEP	The beep sounds when the power is turned on or off, and at the beginning and end
						of recording. Also to activate the shutter sound effect ( pg. 26, 40).
					MELODY	Instead of a beep, a melody sounds when any operation is performed. It also
						activates the shutter sound effect ( pg. 26, 40).
		TALLY			OFF	The tally lamp remains off at all times.
					ON	The tally lamp comes on to signal the start of recording.
			: Factory-preset
NOTES:						MANUAL
● The “				MANUAL” settings are effective only when the Power Switch is set to “				”.

● “ SYSTEM” functions which are set when the Power Switch is set to “MANUAL ” are also applied when the Power Switch is set to “PLAY”( pg. 48).