JVC VN-C11 manual Setting the Network, Adjusting the Camera, Setting with V.Networks Controller

Page 11

Preparation Procedure

Set the camera in the following procedure.

Step 1 Connection and Installation

 

 

Attach a lens and connect the power cable, a LAN cable and an alarm etc.

☞ Page 12

Then, install the camera to a fixer, etc. Fix a wire securely for preventing the

 

camera from falling off.

 

After installing the camera, connect the MONITOR OUT terminal located on

 

the rear panel to the monitor TV and adjust the camera angle.

 

(For back-focus adjustment, ☞ Page 24)

 

Step 2 Setting the Network

Install the software [V.Networks Controller], and set the network for the PC

and VN-C11. Also perform the setting with [V.Networks Setup Tool] and regis- ☞ Page 16 tration of the connected camera with [V.Networks Controller].

❈If multiple PCs are in use, first turn on the power for one PC and proceed to Other Settings with V.Networks Setup Tool. Only then, turn on the power to a second PC and go on to Other Settings with V.Networks Setup Tool. Repeat the procedure for

other PCs. Refer to the PDF instruction manual inside the supplied CD-ROM.

Step 3 Adjusting the Camera

Adjust the back-focus while checking images.

☞ Page 24

 

Step 4 Setting with V.Networks Controller

Set image quality and alarm, etc. by using [V.Networks Controller] which has been installed.

Step 5 Operations with V.Networks Controller

Now the camera is ready for recording and playback, etc. with [V.Networks Controller].

Step 6 Operations with a Web Browser

The camera is ready for Web operations.

☞Page 25

☞Page 27

☞Page 28

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents VN-C11 Important Safeguards Information for Europe Safety PrecautionsInformation for USA Contents Introduction Preparations Operations Others Items Included FeaturesIntroduction Upgrading the Application LAN SpecificationsOperating Precautions Bracket for camera mounting Back-focus adjustment ringLens mount BF Lock locking screwSide and rear views Peer-to-Peer Connection PreparationsConnection Examples LAN Connection Network ConnectionOperations with V.Networks Controller Setting the NetworkAdjusting the Camera Setting with V.Networks ControllerPin Plug Preparations Connection and InstallationAttaching a Lens For a system with multiple VN-C11s Power CordPower Monitor OUT Fall Prevention Securing wireInstalling Codec Preparations Setting the NetworkInstalling V.Networks Setup Tool Installing DirectX 8.1 and CodecClick Click in Local Area Connection Properties Preparations Setting the NetworkSelect Settings and click Control Panel Preparations Setting the Network Setting the IP Address for VN-C11 with V.Networks Setup Tool Start up V.Networks Controller. New is displayed Registering the Connected Camera with V.Networks ControllerFor a zoom lens Preparations Adjusting the CameraFor a fixed-focus lens Operations Setting with V.Networks Controller Help File SettingView Camera Reduced screenPC must also satisfy the following Web browser conditions Operations Operations with a Web BrowserSecurity level User Operator AdministratorVN-C11 top page appears Start up the Web browserOthers SpecificationsExternal Dimensions VN-C11 V.NETWORKS
Top Page Image Contents