JVC VN-C11 manual Start up V.Networks Controller

Page 22

Preparations (Step 2 Setting the Network)

Setting the IP Address for VN-C11 with V.Networks Setup Tool (continued)

2. Confirm the settings.

For other settings, refer to the PDF instruction manual inside the supplied CD-ROM.

3. Click .

Select whether to use DHCP.

Note

With DHCP selected, the IP ad- dress of the DHCP server etc. can be checked.

Change the IP address to the one alloted, or approved, by the network administrator.

Set the subnet mask to an appropriate value according to the operating environ- ment. Ask the network administrator if nec- essary.

Click .

[V.Networks ID] works as an identifica- tion code set to VN-C11. Only alphanu- meric characters can be used. This ID does not directly affect the operation by the user. Normally, the ID should be set as ÒCAM00001,Ó ÒCAM00002Ó etc.

(0 to 8 characters)

Click to update the values.

Note

A new IP address becomes effective when VN-C11 is automatically reset.

4. Start up [V.Networks Controller]. (Page 23)

Note

In a system where more than one VN-C11 are used, turn on the power for a VN-C11 first and proceed the setting to Other Settings with V.Networks Setup Tool. Only then turn on the power for a second one and go on to Other Settings with V.Networks Setup Tool. Repeat the proce- dure for the other cameras. Refer to the PDF instruction manual inside the supplied CD-ROM.

22

Image 22
Contents VN-C11 Important Safeguards Information for USA Safety PrecautionsInformation for Europe Contents Introduction Preparations Operations Others Introduction FeaturesItems Included LAN Specifications Upgrading the ApplicationOperating Precautions BF Lock locking screw Back-focus adjustment ringLens mount Bracket for camera mountingSide and rear views Network Connection PreparationsConnection Examples LAN Connection Peer-to-Peer ConnectionSetting with V.Networks Controller Setting the NetworkAdjusting the Camera Operations with V.Networks ControllerAttaching a Lens Preparations Connection and InstallationPin Plug Power Cord For a system with multiple VN-C11sPower Monitor OUT Securing wire Fall PreventionInstalling DirectX 8.1 and Codec Preparations Setting the NetworkInstalling V.Networks Setup Tool Installing CodecClick Preparations Setting the Network Click in Local Area Connection PropertiesSelect Settings and click Control Panel Preparations Setting the Network Setting the IP Address for VN-C11 with V.Networks Setup Tool Start up V.Networks Controller. Registering the Connected Camera with V.Networks Controller New is displayedFor a fixed-focus lens Preparations Adjusting the CameraFor a zoom lens Operations Setting with V.Networks Controller View File SettingHelp Reduced screen CameraOperations Operations with a Web Browser PC must also satisfy the following Web browser conditionsUser Operator Administrator Security levelStart up the Web browser VN-C11 top page appearsExternal Dimensions SpecificationsOthers VN-C11 V.NETWORKS