JVC VN-C11 manual Operations Setting with V.Networks Controller

Page 25

Operations (Step 4 Setting with V.Networks Controller)

Starting Up V.Networks Controller

With the installed Controller, camera images can be monitored. The settings for recording, replay and frame rate etc. can also be performed.

1. Select [Start], [Programs], [V.NETWORKS] and then [V.Networks Controller] to start up [V.Networks Controller].

In the pull down menu, select the camera to connect.

Caution

After the power for VN-C11 is turned on, there will be about 20 seconds until VN-C11 becomes ready to be con- nected with the PC. This is not a de- fect.

Live images from the camera are dis- played.

Note

¥If a password has been set, enter the correct password.

¥This [Controller] can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (only for JPEG), VN- A1, VN-C10 and VN-C11.

¥In the MPEG4 mode, up to 4 clients can be connected at one time. If 5 or more clients are connected, the message ÒThe VN-C11U has not start the Streaming Service.Ó appears.

25

Image 25

Contents VN-C11 Important Safeguards Information for USA Safety PrecautionsInformation for Europe Contents Introduction Preparations Operations Others Introduction FeaturesItems Included Upgrading the Application LAN SpecificationsOperating Precautions Lens mount Back-focus adjustment ringBF Lock locking screw Bracket for camera mountingSide and rear views Connection Examples LAN Connection PreparationsNetwork Connection Peer-to-Peer ConnectionAdjusting the Camera Setting the NetworkSetting with V.Networks Controller Operations with V.Networks ControllerAttaching a Lens Preparations Connection and InstallationPin Plug For a system with multiple VN-C11s Power CordPower Monitor OUT Fall Prevention Securing wireInstalling V.Networks Setup Tool Preparations Setting the NetworkInstalling DirectX 8.1 and Codec Installing CodecClick Click in Local Area Connection Properties Preparations Setting the NetworkSelect Settings and click Control Panel Preparations Setting the Network Setting the IP Address for VN-C11 with V.Networks Setup Tool Start up V.Networks Controller. New is displayed Registering the Connected Camera with V.Networks ControllerFor a fixed-focus lens Preparations Adjusting the CameraFor a zoom lens Operations Setting with V.Networks Controller View File SettingHelp Camera Reduced screenPC must also satisfy the following Web browser conditions Operations Operations with a Web BrowserSecurity level User Operator AdministratorVN-C11 top page appears Start up the Web browserExternal Dimensions SpecificationsOthers VN-C11 V.NETWORKS