JVC VN-C11 manual Side and rear views

Page 9

Controls, Connectors and Indicators (continued)

(Side and rear views)

90 !

#$ %

RESET

IRIS

@

 

 

 

1

2

ISOLATED POWERONLY

 

DC12V

AC24V

CLASS 2 ONLY ForUSA

For EUROPE

POWER MONITOR OUT

G

2

1

OUT COM

INPUT

 

 

OUTPUT

 

ALARM

PUSH

 

 

 

10BASE-T/100BASE-TX

DO NOT CONNECT TO THE

TELEPHONE NETWORK

For USA

9Ventilation opening

For the internal cooling fan. Install the cam- era in a way that does not cover the opening.

0[RESET] button

Press this button to reset VN-C11. If this but- ton is held down for 2 seconds or longer, the values set with [V.Networks Setup Tool] re- turn to those set at the factory, and VN-C11 restarts.

![IRIS] terminal

For connecting with a DC IRIS lens.

(A video iris lens cannot be connected.)

@[POWER] indicator

This indicator starts blinking when the power is turned on. When the camera is ready for network connection, this becomes steady on. If the indicator blinks while the camera is in use, check the camera and/or the network equipment.

&^

#[DC 12 V/AC 24 V] Power terminal

For connecting to a DC 12 V or AC 24 V, 50 Hz/ 60 Hz, power source. (☞ Page 13)

$[ALARM INPUT] terminals

For connecting with an external alarm equip- ment.

%[ALARM OUTPUT] terminals

For connecting with an external alarm equip- ment.

^[10 BASE-T/100 BASE-TX]

For network connection with a LAN cable. (☞ Page 14)

&[MONITOR OUT] terminal

For connecting to monitor TV when deciding camera angles.

Caution

For angle adjustment only, problems such as noise may occur if connected with a switcher.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VN-C11 Important Safeguards Safety Precautions Information for USAInformation for Europe Contents Introduction Preparations Operations Others Features IntroductionItems Included Upgrading the Application LAN SpecificationsOperating Precautions Lens mount Back-focus adjustment ringBF Lock locking screw Bracket for camera mountingSide and rear views Connection Examples LAN Connection PreparationsNetwork Connection Peer-to-Peer ConnectionAdjusting the Camera Setting the NetworkSetting with V.Networks Controller Operations with V.Networks ControllerPreparations Connection and Installation Attaching a LensPin Plug For a system with multiple VN-C11s Power CordPower Monitor OUT Fall Prevention Securing wireInstalling V.Networks Setup Tool Preparations Setting the NetworkInstalling DirectX 8.1 and Codec Installing CodecClick Click in Local Area Connection Properties Preparations Setting the NetworkSelect Settings and click Control Panel Preparations Setting the Network Setting the IP Address for VN-C11 with V.Networks Setup Tool Start up V.Networks Controller. New is displayed Registering the Connected Camera with V.Networks ControllerPreparations Adjusting the Camera For a fixed-focus lensFor a zoom lens Operations Setting with V.Networks Controller File Setting ViewHelp Camera Reduced screenPC must also satisfy the following Web browser conditions Operations Operations with a Web BrowserSecurity level User Operator AdministratorVN-C11 top page appears Start up the Web browserSpecifications External DimensionsOthers VN-C11 V.NETWORKS
Top Page Image Contents