JVC VN-C11 manual Registering the Connected Camera with V.Networks Controller, New is displayed

Registering the Connected Camera with V.Networks Controller

The connected camera can be registered with the installed [V.Networks Controller].

1. Select [Start], [Programs], [V.NETWORKS] and then [V.Networks Controller] to start up [V.Networks Controller].

Select [File] and [New].

2. [New] is displayed.

Enter 198.168.0.2 in [IP Address].

Note

In a DHCP environment, enter the IP address allotted by the DHCP server.

Enter [V.Network Name], a name under which the camera is registered. Use a name that is easy to remember, such as the installation location or number. (1 to 40 characters)

Recording files of the name given in are saved in a designated folder here.

You can set whether VN-C11 automatically starts recording upon connection.

Note

For connecting VN-C11 with the factory settings, either one of the environments described below is required.

¥Environment where no DHCP server exists.

¥Environment where a DHCP server, which clearly defines the IP address and MAC address allotted to VN-C11, exists.

23