JVC VN-C11 Preparations Setting the Network, Installing V.Networks Setup Tool, Installing Codec

Preparations (Step 2 Setting the Network)

Installing the Software

For operating VN-C11, install the software from the CD-ROM, which is supplied with

the camera in the following procedure.

Installing V.Networks Controller

~~~~~~~~~~~~~~~

1.Select [Setup.exe] found in the [JVC] folder.

2.Proceed by following the instructions shown on the screen.

3.If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the

Windows [Start] menu. [V.Networks Controller] is displayed in [V.Networks].

Installing V.Networks Setup Tool

1.Open the [JVC] folder and then the ÒsetupÓ folder inside. Select [Setup.exe].

2.Proceed by following the instructions shown on the screen.

3.If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the

Windows [Start] menu. [vn-c11u Setup Tool] is displayed in [V.Networks].

Installing DirectX 8.1 and Codec

[DirectX 8.1] and ISO MPEG4 Codec are required for viewing MPEG4 images with VN-C11. If the version currently installed in the PC is older, install the version 8.1 by following the procedure below.

Installing Codec

Select [WMPCD8.exe] and install Codec by following the instructions shown on the screen.

Installing DirectX 8.1

1.Click [Start] and select [Run]. And enter [dxdiag] in the box and click [OK].

2.If the version is older, select [DX81NTeng.exe] and follow the instructions on the screen.

16