JVC TK-C676 manual Troubleshooting, Symptom Cause Information Remedy, Power cannot be, Turned on

Page 41

Troubleshooting

Symptom

Cause (Information)

 

Remedy

 

 

 

Picture is not displayed.

Is there a problem in the power cable(s) connecting the

Use cable(s) with low cable resistance

 

camera to the power supply unit?

and of the correct cable length.

 

(If the power cable(s) are too long or of an inadequate

(Ensure that the voltage supplied to the

 

size, the correct voltage may not be supplied due to an

terminal board is correct during camera

 

increase in cable resistance.)

operation, i.e. when the rated current is

 

 

flowing through the camera.)

 

 

 

Power cannot be

Are cables connected properly to the terminal board on

Connect the cables properly.

turned on.

the Ceiling Mount ?

 

 

 

 

 

Power can be turned on

Is there a problem with the power cable(s) connecting the

Change power cable(s) to one(s) of lower

but it later turns off when

camera to the power supply unit?

resistance (i.e. thicker or shorter cable(s)).

the pan/tilt mechanism

(If the power cable(s) are too long or of an inadequate

(

P. 14)

size, the correct voltage may not be supplied due to an

☞

 

starts operation.

 

 

increase in cable resistance during the pan/tilt operation.)

 

 

 

 

 

 

 

 

Video sync error occurs.

When L/L is set, does the power supply frequency match

Use a stable power supply with a

 

the video frequency (50 Hz)?

matching frequency.

 

Is a large noise interfered with the power supply?

Prevent any penetration of noise in the

 

 

power supply.

 

 

 

 

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents TK-C676 Important Safeguards Contents Provided Accessories FeaturesSafety Precautions Instructions Ceiling mount Preset positions Precautions for Correct OperationCamera setups with which auto focusing may be difficult  Zooming Ceiling Mount Controls, Connectors and Indicators$ Machine ID Switch Camera Connector FemaleSetting Switches Connector MaleObserve the following points when connecting compo Switch settings PMulti-Drop Communication System Cable connections PMemo Terminal side of the Ceiling Mount Switch 7 OFF Switch 8 onPoint-to-Point Communication System Two wires must be connected Four wires must be connectedDuplex For example connection with an RM-P2580 Camera Setting switches Switch SettingsMachine ID Camera ID check procedureBers on the RM-P2580 ExampleMake a 90 mm diameter hole in the ceiling Cable ConnectionsConnect the cables Remove the cover from the Ceiling MountAttach the cover Attach the drop prevention wire Attaching a safety wireAttaching the Ceiling Mount Attaching the CameraFit the camera Ensure that the lock screw is looseRotate the camera Tighten the lock screwSetting the camera menus from an RM-P2580 Setup ProcedurePress and hold the Menu button for 3 seconds Press the SET buttonMenu for setting up the function of each preset position Menu for setting up the home posi- tion onlyMenu Screen Flow Normal screenCamera Function Screen Camera TITLE/ALARM Screen Alarm Alarm Input PolarityAlarm Output Alarm OUT1Camera ALC/ExDR screen Camera Video Adjustment ScreenExDR Mode AGC Mode10 dB Sense UPMode ColourLevel LOWHome Motion Detect Screen Alarm DisplayArea Edit DemonstrationAuto PAN/PATROL/TRACE Screen Position Function SET Screen Factory Settings screenPrivate Mask Setup Repeat steps 5 and 6 for each title character Camera Title SetupPress the Tele button Move the cursor to Area Title Edit and press the SET button Area Title SetupPress the FAR button Repeat steps 5 to 7 for each area titleRepeat steps 5 to 7 for each alarm title Alarm Title SetupDisplay the Setup menu on the camera Move the cursor to Area Edit and press the SET button Home Motion Detect SetupHome Motion Detect menu Area Edit screenAdjust the viewing angle of the start position Auto PAN SetupSet the auto pan mode and speed Auto Patrol Setup Move the cursor to Autotrace SET and press the SET button Auto Trace SetupSet the patrol start position Auto Trace SET screen is displayedRepeat steps 5 to 7 for each title character Position Title SetupPosition Function SET screen Position Title screenCeiling plate Attaching a Ceiling Flush Mount Bracket Optional WB-S575Clamp the Ceiling Flush Mount Bracket Connection Cables Attach the Ceiling Mount to the Ceiling Flush Mount BracketAttach the ceiling panel Remove the ceiling panel Removing a Ceiling Flush Mount Bracket Optional WB-S575Remove the camera Check the release labels thoroughly before removalSymptom Cause Information Remedy TroubleshootingPower cannot be Turned onCamera SpecificationsPan/Tilt Mechanism GeneralDimensions in combination with the WB-S575 External dimensions Unit mmCeiling mount hole WB-S575 Ceiling flush mount bracket + Ceiling panelTK-C676 Dome Type Camera
Related manuals
Manual 216 pages 55.17 Kb Manual 48 pages 62.15 Kb

TK-C676 specifications

The JVC TK-C676 is a professional-grade CCTV camera renowned for its impressive image quality and reliable performance in various surveillance applications. As part of JVC's reputable line of security products, the TK-C676 incorporates advanced technologies that make it a popular choice among security professionals and businesses alike.

One of the standout features of the TK-C676 is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crisp and clear images, ensuring optimal visibility even in challenging lighting conditions. The camera offers a resolution of 540 TV lines, which allows for detailed surveillance footage that can be crucial for identifying individuals or activities in monitored areas.

Another notable characteristic of the TK-C676 is its robust low-light performance. Thanks to its sense-up technology, the camera can automatically adjust its sensitivity in low-light environments, providing better image quality without the need for external lighting. This feature is particularly valuable for nighttime surveillance or in dimly lit indoor settings, enhancing the overall effectiveness of security measures.

The TK-C676 also excels in flexibility and adaptability with its mechanical IR cut filter. This technology allows for seamless switching between day and night modes, ensuring consistent image quality during both daytime and nighttime operation. This adaptability makes the camera suitable for various applications, including retail stores, parking lots, and public spaces.

Additionally, the JVC TK-C676 features a varifocal lens with a focal length of 3.5mm to 8mm, providing users with the ability to adjust the field of view based on specific surveillance needs. This versatility enables the camera to cover wide areas or focus on particular subjects, making it ideal for both indoor and outdoor placements.

In terms of durability, the TK-C676 is built to withstand harsh environmental conditions. With a sturdy housing that resists both water and dust, this camera can be installed in various locations without compromising on performance. This reliability is essential for continuous operation in demanding environments.

Overall, the JVC TK-C676 is a well-rounded CCTV camera that offers high-resolution imaging, excellent low-light performance, and adaptable features. Its combination of advanced technology, durable construction, and flexible camera options makes it a strong choice for anyone seeking a reliable surveillance solution. Whether for commercial, industrial, or residential applications, the TK-C676 proves to be a valuable asset in enhancing security measures.
Top Page Image Contents