JVC TK-C676 Cover, Camera Connector Female, @ Drop Prevention Hook, # Clamping Holes x, Lens

Page 7

# % $

! #

@

(Setting switch side)

0Cover

For protection against water drips. Slit the rubber cap on

this cover and pass the cable through the slits. ☞ P. 14

!Camera Connector (Female)

Connect to ^, the Male Connector on the camera.

@Drop Prevention Hook

Attach the Drop Prevention Wire & to this hook to prevent the camera from falling.

#Clamping Holes (x 4)

Attach the camera to a ceiling or to a Ceiling Flush Mount Bracket (optionally available) using these holes.

$[MACHINE ID] Switch

When an RS-485 communication system is used, for ex- ample when using the camera in a system controlled by an RM-P2580, set the camera IDs individually for each

camera. ☞ P. 13

%Setting Switches

Use these to set the PROTOCOL, etc. ☞ P. 12

&

^

*

⁄

)(

^Connector (Male)

Connect to !, the Female Camera Connector on the Ceil- ing Mount.

&Drop Prevention Wire

Attach this wire to the Drop Prevention Hook @ on the Ceiling Mount.

*Camera Clamping Bracket

In order to clamp the camera onto the Ceiling Mount, in- sert and tighten the Locking Screw 4 into this bracket.

(Lens

The lens cannot be replaced.

)Dome Cover

The dome cover is fragile. Take care when handling it.

⁄Camera Body Cover

Do not remove the camera body cover while the camera is installed on a ceiling. Doing so will cause the dome cover to fall down.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TK-C676 Important Safeguards Contents Instructions Ceiling mount FeaturesProvided Accessories Safety Precautions Zooming Precautions for Correct Operation Preset positions Camera setups with which auto focusing may be difficult Ceiling Mount Controls, Connectors and IndicatorsConnector Male Camera Connector Female$ Machine ID Switch Setting SwitchesCable connections P Switch settings PObserve the following points when connecting compo Multi-Drop Communication SystemMemo Point-to-Point Communication System Switch 7 OFF Switch 8 onTerminal side of the Ceiling Mount For example connection with an RM-P2580 Camera Four wires must be connectedTwo wires must be connected Duplex Setting switches Switch SettingsExample Camera ID check procedureMachine ID Bers on the RM-P2580Remove the cover from the Ceiling Mount Cable ConnectionsMake a 90 mm diameter hole in the ceiling Connect the cablesAttach the cover Attaching the Camera Attaching a safety wireAttach the drop prevention wire Attaching the Ceiling MountTighten the lock screw Ensure that the lock screw is looseFit the camera Rotate the cameraPress the SET button Setup ProcedureSetting the camera menus from an RM-P2580 Press and hold the Menu button for 3 secondsNormal screen Menu for setting up the home posi- tion onlyMenu for setting up the function of each preset position Menu Screen FlowCamera Function Screen Camera TITLE/ALARM Screen Alarm OUT1 Alarm Input PolarityAlarm Alarm OutputCamera ALC/ExDR screen Camera Video Adjustment ScreenSense UP AGC ModeExDR Mode 10 dBLOW ColourMode LevelDemonstration Alarm DisplayHome Motion Detect Screen Area EditAuto PAN/PATROL/TRACE Screen Position Function SET Screen Factory Settings screenPrivate Mask Setup Press the Tele button Camera Title SetupRepeat steps 5 and 6 for each title character Repeat steps 5 to 7 for each area title Area Title SetupMove the cursor to Area Title Edit and press the SET button Press the FAR buttonDisplay the Setup menu on the camera Alarm Title SetupRepeat steps 5 to 7 for each alarm title Area Edit screen Home Motion Detect SetupMove the cursor to Area Edit and press the SET button Home Motion Detect menuSet the auto pan mode and speed Auto PAN SetupAdjust the viewing angle of the start position Auto Patrol Setup Auto Trace SET screen is displayed Auto Trace SetupMove the cursor to Autotrace SET and press the SET button Set the patrol start positionPosition Title screen Position Title SetupRepeat steps 5 to 7 for each title character Position Function SET screenClamp the Ceiling Flush Mount Bracket Attaching a Ceiling Flush Mount Bracket Optional WB-S575Ceiling plate Attach the ceiling panel Attach the Ceiling Mount to the Ceiling Flush Mount BracketConnection Cables Check the release labels thoroughly before removal Removing a Ceiling Flush Mount Bracket Optional WB-S575Remove the ceiling panel Remove the cameraTurned on TroubleshootingSymptom Cause Information Remedy Power cannot beGeneral SpecificationsCamera Pan/Tilt MechanismWB-S575 Ceiling flush mount bracket + Ceiling panel External dimensions Unit mmDimensions in combination with the WB-S575 Ceiling mount holeTK-C676 Dome Type Camera
Related manuals
Manual 216 pages 55.17 Kb Manual 48 pages 62.15 Kb

TK-C676 specifications

The JVC TK-C676 is a professional-grade CCTV camera renowned for its impressive image quality and reliable performance in various surveillance applications. As part of JVC's reputable line of security products, the TK-C676 incorporates advanced technologies that make it a popular choice among security professionals and businesses alike.

One of the standout features of the TK-C676 is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crisp and clear images, ensuring optimal visibility even in challenging lighting conditions. The camera offers a resolution of 540 TV lines, which allows for detailed surveillance footage that can be crucial for identifying individuals or activities in monitored areas.

Another notable characteristic of the TK-C676 is its robust low-light performance. Thanks to its sense-up technology, the camera can automatically adjust its sensitivity in low-light environments, providing better image quality without the need for external lighting. This feature is particularly valuable for nighttime surveillance or in dimly lit indoor settings, enhancing the overall effectiveness of security measures.

The TK-C676 also excels in flexibility and adaptability with its mechanical IR cut filter. This technology allows for seamless switching between day and night modes, ensuring consistent image quality during both daytime and nighttime operation. This adaptability makes the camera suitable for various applications, including retail stores, parking lots, and public spaces.

Additionally, the JVC TK-C676 features a varifocal lens with a focal length of 3.5mm to 8mm, providing users with the ability to adjust the field of view based on specific surveillance needs. This versatility enables the camera to cover wide areas or focus on particular subjects, making it ideal for both indoor and outdoor placements.

In terms of durability, the TK-C676 is built to withstand harsh environmental conditions. With a sturdy housing that resists both water and dust, this camera can be installed in various locations without compromising on performance. This reliability is essential for continuous operation in demanding environments.

Overall, the JVC TK-C676 is a well-rounded CCTV camera that offers high-resolution imaging, excellent low-light performance, and adaptable features. Its combination of advanced technology, durable construction, and flexible camera options makes it a strong choice for anyone seeking a reliable surveillance solution. Whether for commercial, industrial, or residential applications, the TK-C676 proves to be a valuable asset in enhancing security measures.
Top Page Image Contents