JVC VN-V686U manual Setting MPEG-4 Multicast Port Number for VN-V686

Allowed users admin, operator

Setting MPEG-4 Multicast Port Number for VN-V686

Format /api/param?network.destination(1).port=data

Example /api/param?network.destination(1).port=59152

Example of Response

network.destination(1).port&202 Accepted(network.destination(1).host=save)

Interpretation Change MPEG-4 multicast port number. Specify from 2 to 65534. To validate the change, use "network.destination(2).host=save" API. After the save, start streaming by "network.destination(2).host=start" API.

Allowed user admin

6.14. Access Restrictions

The APIs below are related to access restrictions. These are equivalent to the features on the Access Restrictions page of the WEB setting page. Refer to the instruction manual for details on the Access Restrictions page.

Getting Deny/Allow Setting of Client Restrictions from VN-V686

Format /api/param?network.access_control(stream_out).logic

Example of Response network.access_control(stream_out).logic=deny&200 OK

Interpretation Acquire the deny/allow setting of client restrictions. Either deny or allow will be returned. These restrictions are applied to getting JPEG.

Allowed users admin, operator

Setting Client Restriction to Deny/Allow for VN-V686

Format /api/param?network.access_control(stream_out).logic=data

Example /api/param?network.access_control(stream_out).logic=deny

Example of Response network.access_control(stream_out).logic&200 OK

Interpretation Change the deny/allow setting of client restrictions. Specify as deny or allow. These restrictions are applied to getting JPEG.

Allowed user admin

Getting IP Address Setting of Restricted Client from VN-V686

Format /api/param?network.access_control(stream_out).host(Number)

Example When Getting the first IP address

/api/param?network.access_control(stream_out).host(1)

Example of Response network.access_control(stream_out).host(1)=10.0.0.100&200 OK

83