![](/images/new-backgrounds/1248893/24889373x1.webp)
DUBBING
Connector cover*
Power
Switch
To AV
To S
Audio/Video
cable (provided)
White to
AUDIO L IN
Yellow to |
|
|
| Red to | ||
VIDEO** IN |
|
|
|
|
| AUDIO R IN |
|
|
|
To
VCR
EN37
Dubbing To A VCR
1
2
3
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 on the camcorder and engage the VCR’s Record mode.
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
*When connecting the cables, open this cover.
**Connect when an
TV |
NOTES:
●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.
●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 35).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen ( pg. 35).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 35).
●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be con- nected to the camcorder.
●The
Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.
●You can use Playback Zoom ( pg. 41) in step 5.