JVC GR-DVL210 specifications EN55

			EN55
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
25. Images on the LCD	25. • In places subject to low	25. • Adjust the brightness and
monitor appear dark or	temperature, images	angle of the LCD monitor
whitish.	become dark due to the	( pg. 14, 15).
	characteristics of the LCD
	monitor. When this
	happens, the displayed
	colors differ from those that
	are actually recorded. This
	is not a defect of the
	camcorder.
	• When the LCD monitor's
	fluorescent light reaches the
	end of its service life,
	images on the LCD monitor
	become dark. Consult your
	nearest JVC dealer.
26. The rear of the LCD	26. • The light used to illuminate	26. • Close the LCD monitor to
monitor is hot.	the LCD monitor causes it to	turn it off or set the Power
	become hot.	Switch to “OFF”, and let the
		unit cool down.
27. The indicators and the	27. • This may occur when the	27.
image color on the LCD	surface or the edge of the		————
monitor are not clear.	LCD monitor is pressed.
28. The LCD monitor or	28. • Certain Fade/Wipe effects,	28. • Re-read the sections
viewfinder indications	certain modes of Program	covering Fade/Wipe effects,
blink.	AE with special effects,	Program AE with special
	“DIS” and other functions	effects and “DIS” ( pg. 24
	that cannot be used together	– 27, 33).
	are selected at the same
	time.
29. Colored bright spots	29. • The LCD monitor and the	29.
appear all over the LCD	viewfinder are made with
monitor or the viewfinder.	high-precision technology.
	However, black spots or
	bright spots of light (red,
	green or blue) may appear
	constantly on the LCD		————
	monitor or the viewfinder.
	These spots are not
	recorded on the tape. This is
	not due to any defect of the
	unit. (Effective dots: more
	than 99.99 %)
30. During recording, sound	30. • This is normal.	30.	————
cannot be heard.
31. Play, Rewind and Fast-	31. • The Power Switch is set to	31. • Set the Power Switch to
Forward functions do not	“ ” or “ ”.	“	” ( pg. 18).
work.

CONTINUED ON NEXT PAGE