JVC GR-DVL210 Using the Battery Pack, Using AC Power, About Batteries, For other notes,  pg

Page 8

8 EN

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

NOTES:

Recording time is reduced significantly under the following conditions:

Zoom or Record-Standby mode is engaged repeatedly.

The LCD monitor is used repeatedly.

The playback mode is engaged repeatedly.

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

INFORMATION:

GETTING STARTED (cont.)

USING THE BATTERY PACK

Perform step 1 of “CHARGING THE BATTERY PACK” ( pg. 7).

Approximate recording time (unit: min.)

Battery pack

LCD monitor on

Viewfinder on

 

 

 

BN-V408U

1 hr.

1 hr. 15 min.

 

 

 

BN-V416U

2 hrs.

2 hrs. 30 min.

(optional)

 

 

BN-V428U

3 hrs. 30 min.

4 hrs. 20 min.

(optional)

 

 

BN-V840U

5 hrs.

6 hrs. 15 min.

(optional)

 

 

BN-V856U

7 hrs.

8 hrs. 40 min.

(optional)

 

 

 

 

 

The extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/Charger: VU-V840 KIT : BN-V840U battery pack & AA-V15U AC Power Adapter/Charger

VU-V856 KIT : BN-V856U battery pack & AA-V80U AC Power Adapter/Charger Read the kit's instruction manual before using.

Neither BN-V840U nor BN-V856U can be charged by using the AC Adapter provided with this camcorder. Use only the AA-V15U AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80U AC Power Adapter/Charger for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect the BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.

 

USING AC POWER

 

Use the AC Adapter (connect as shown in the illustration).

AC Adapter

NOTES:

The provided AC Adapter features automatic voltage

 

 

selection in the AC range from 110 V to 240 V.

 

For other notes,  pg. 51.

To AC outlet

To DC connector

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C/50°F), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Image 8
Contents GR-DVL210 Dear Customer It is recommended that youSafety Precautions Remote Control Unit RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pgHow To Attach The Lens Cap Automatic DemonstrationContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Selection in the AC range from 110 V to 240Grip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod MountingDate/Time Settings 10 ENLoading/Unloading a Cassette Approximate recording time12 EN Recording Mode SettingSet the tape recording mode depending on your preference Contents Basic Recording & PlaybackTo Adjust The Brightness Of The Display 14 ENBasic Recording Basic RecordingOperation Mode Power Switch Position ManualJournalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 16 ENZoom Zoom OutProper recording When a blank portion is recorded on a tapeTime Code To Control The Speaker Volume 18 ENBasic Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search 20 EN If using a VCR . . . go to step If not . . . go to step EN21Advanced Features 22 ENSnapshot Mode Selection For RecordingSnapshot Snapshot RecordingTo Deactivate The Selected Mode 24 ENNight-Alive Program AE With Special EffectsSlow Slow Shutter Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots 26 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionFader And Wipe Menu Menu EffectFeature Auto Focus Feature Manual Focus28 EN To obtain correct focusExposure Control Iris LockWhite Balance Adjustment 30 ENManual White Balance Operation To Return To Automatic White BalanceUsing Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance System or DisplayMenu Screen Explanations Recording. Also to activate the shutter sound effect  pg Normal screen ratioScreen ratio becomes Does not reset all settings to the factory-preset Resets all settings to the factory-presetWhen the Power Switch is set from OFF to or When the date is changed during video playbackFollowing procedure applies to all except Synchro Comp  pg For Playback MenuPlayback Sound DisplayDubbing Dubbing To a VCR38 EN To use this camcorder as a playerInstalling The Battery RM-V700U, optional Using the Remote Control UnitInstalling The Batteries RM-V715U, provided Using the Remote Control Unit 40 ENFeature Playback Zoom Press Play 4 to find the scene of interest42 EN Random Assemble Editing R.A.EditSET REMOTE/VCR Code VCR Recording deckVCR other than above JVC VCR equipped with a remote pause connectorMake Connections 44 EN Select ScenesAutomatic Editing to VCR Adjustment of VCR/CAMCORDER Timing 46 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Using PC connection cable Using DV cableAUsing PC connection cable Using DV cableConnection To a Video Unit Equipped With a DV Connector 50 EN References pg PowerDetails Clean the lens and check 52 ENCorrective Action Replace with new cassetteEN53 Troubleshooting 54 ENEN55 56 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder58 EN 5 6 @ # $Audio/Video Output Connector  pg , 37 Power Lamp  pgMonitor Open Button Push Open  pg Focus Button  pg60 EN LCD Monitor/Viewfinder Indications During RecordingBright Displays the brightness of the LCD Displays the sound modeLCD Monitor/Viewfinder Indications During Playback Indications Function Temperature Range Specifications 64 EN About moisture condensation Serious malfunctioningDeclaration of Conformity Model Number Trade Name66 EN TermsSpecifications For ConnectorsFor General For Digital Video CameraGR-DVL210