JVC GR-DVL210 specifications Temperature Range Specifications

Page 63

CAUTIONS

When using the AC Adapter in areas other than the

USA

The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.

USING HOUSEHOLD AC PLUG ADAPTER

In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown.

For this AC plug adapter, consult your nearest JVC dealer.

Plug adapter

General Battery Precautions

If the remote control is not functioning even if it is being operated correctly, the batteries are ex- hausted. Replace them with fresh ones.

Use only the following batteries: AAA (R03) size x 2

Please make note of the following rules for battery use. When misused, the batteries can leak or explode.

1.When replacing batteries, refer to page 39.

2.Do not use any different size of batteries from those specified.

3.Be sure to install batteries in the correct direction.

4.Do not use rechargeable batteries.

5.Do not expose the batteries to excessive heat as they can leak or explode.

6.Do not dispose of the batteries in a fire.

7.Remove the batteries from the unit if it is to be stored for an extended period to avoid battery leakage which can cause malfunctions.

Battery Packs

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the

following cautions:

Terminals

 

1.To avoid hazards . . .

.... do not burn.

.... do not short-circuit the terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag.

.... do not modify or disassemble.

.... do not expose the battery to temperatures exceeding 60°C (140°F), as this may cause the battery to overheat, explode or catch fire.

.... use only specified chargers.

EN63

2.To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

.... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

.... fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time.

.... remove from charger or powered unit when not in use, as some machines use current even when switched off.

NOTES:

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications

Charging ............. 10°C to 35°C (50°F to 95°F) Operation ........... 0°C to 40°C (32°F to 104°F) Storage ............... –10°C to 30°C (14°F to 86°F)

Recharging time is based on room temperature of 20°C (68°F).

The lower the temperature, the longer recharging takes.

Cassettes

To properly use and store your cassettes, be sure to read the following cautions:

1. During use . . .

.... make sure the cassette bears the Mini DV

mark.

.... be aware that recording onto prerecorded

tapes automatically erases the previously recorded video and audio signals.

.... make sure the cassette is positioned properly

when inserting.

.... do not load and unload the cassette repeatedly

without allowing the tape to run at all. This slackens the tape and can result in damage.

.... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

2. Store cassettes . . .

.... away from heaters or other heat sources.

.... out of direct sunlight.

.... where they won’t be subject to unnecessary

shock or vibration.

.... where they won’t be exposed to strong

magnetic fields (such as those generated by motors, transformers or magnets).

.... vertically, in their original cases.

Image 63
Contents GR-DVL210 It is recommended that you Dear CustomerSafety Precautions RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pg Remote Control UnitAutomatic Demonstration How To Attach The Lens CapGetting Started ContentsSlide BAT. Release and pull out the battery pack PowerCharging the Battery Pack To Detach The Battery PackSelection in the AC range from 110 V to 240 Using the Battery PackUsing AC Power About BatteriesTripod Mounting Grip AdjustmentViewfinder Adjustment Shoulder Strap Attachment10 EN Date/Time SettingsApproximate recording time Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preference12 EN Basic Recording & Playback ContentsBasic Recording To Adjust The Brightness Of The Display14 EN Basic RecordingSELF-RECORDING Operation ModePower Switch Position Manual Journalistic ShootingZoom Out Slide the Power Zoom Lever towards T16 EN ZoomWhen a blank portion is recorded on a tape Time CodeProper recording Normal Playback To Control The Speaker Volume18 EN BasicTo cancel Blank Search midway Blank SearchPress Blank Search 20 EN EN21 If using a VCR . . . go to step If not . . . go to step22 EN Advanced FeaturesSnapshot Recording Snapshot Mode SelectionFor Recording SnapshotProgram AE With Special Effects To Deactivate The Selected Mode24 EN Night-AliveGives recorded scenes a strobe effect Your recording looks like a series of consecutive snapshotsSlow Slow Shutter Picture Wipe or Dissolve Selection 26 ENFade/Wipe Effects FADE/WIPE SelectionMenu Effect Fader And Wipe MenuTo obtain correct focus Feature Auto FocusFeature Manual Focus 28 ENIris Lock Exposure ControlTo Return To Automatic White Balance White Balance Adjustment30 EN Manual White Balance OperationSystem or Display Using Menus for Detailed AdjustmentFor Recording Menu If you have selected WIPE/FADER Program AE or W. BalanceMenu Screen Explanations Normal screen ratio Screen ratio becomesRecording. Also to activate the shutter sound effect  pg When the date is changed during video playback Does not reset all settings to the factory-presetResets all settings to the factory-preset When the Power Switch is set from OFF to orFor Playback Menu Following procedure applies to all except Synchro Comp  pgDisplay Playback SoundDubbing To a VCR DubbingTo use this camcorder as a player 38 ENUsing the Remote Control Unit Installing The Batteries RM-V715U, providedInstalling The Battery RM-V700U, optional 40 EN Using the Remote Control UnitPress Play 4 to find the scene of interest Feature Playback ZoomVCR Recording deck 42 ENRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeJVC VCR equipped with a remote pause connector Make ConnectionsVCR other than above Select Scenes 44 ENAutomatic Editing to VCR Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER Timing46 EN For More Accurate EditingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingTo hear the dubbed sound during playback Using DV cable Using PC connection cableUsing DV cable AUsing PC connection cableConnection To a Video Unit Equipped With a DV Connector References 50 ENPower Details pg Replace with new cassette Clean the lens and check52 EN Corrective ActionEN53 54 EN TroubleshootingEN55 56 EN Press Push Here to close the cassette holder User MaintenanceAfter Use Cleaning The Camcorder Turn off the camcorder5 6 @ # $ 58 ENFocus Button  pg Audio/Video Output Connector  pg , 37Power Lamp  pg Monitor Open Button Push Open  pgLCD Monitor/Viewfinder Indications During Recording 60 ENDisplays the sound mode LCD Monitor/Viewfinder Indications During PlaybackBright Displays the brightness of the LCD Indications Function Temperature Range Specifications 64 EN Trade Name About moisture condensationSerious malfunctioning Declaration of Conformity Model NumberTerms 66 ENFor Digital Video Camera SpecificationsFor Connectors For GeneralGR-DVL210