Power Switch
To DV OUT | The connectors are |
| |
| located beneath |
| the cover. |
Core filter |
|
| DV cable (optional) |
Core filter |
|
To DV IN | Video unit equipped |
| with DV connector |
T W
PLAY (4)
STOP (5)
EN37
Digital Dubbing
It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.
1 Make sure the camcorder’s power is off.
2 Connect the camcorder to your video unit equipped with a DV connector using a DV cable as shown in the illustration.
3
4 While watching the playback on the monitor, engage the DV
NOTES:
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).
●When using the camcorder for dubbing, be sure to use it as a player. The camcorder's DV connector is only for output.
●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.
●Even though the DV cable is connected correctly, sometimes the image may not appear in step 3. If this occurs, turn off the power and make connections again.
●If “Playback Zoom” (☞ pg. 40), “Playback Special Effects” (☞ pg. 41) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV OUT connector.
●Be sure to use a DV cable with core filters.