JVC GR-DVL30 specifications EN43, Make Connections, Select Scenes, VCR other than above

Connector cover**

Connector cover**

To JLIP					To
Core filter					S-Video
					Output
	Yellow to			Red to
	Video			Audio
	Output*			Output R
	White to		A/V cable (provided)
	Audio Output L
			[RCA plug to RCA plug]
Editing cable
(provided)
	To AUDIO,				S-Video cable
	VIDEO*				(provided)
	and	-IN
	connectors
If your VCR has the
SCART connector,					“Y/C”/“CVBS”
use the provided					video out

cable adapter.		select switch
	To Remote
PAUSE or R.A.EDIT		VCR

To PAUSE IN
	TV
T	W
DISPLAY
FADE/WIPE	PLAY
RM-V711U	R.A.EDIT
(provided)	ON/OFF

*Connect when the S-Video cable is not used.

**When connecting cables, open this cover.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the

Playback Menu (☞ pg. 30). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in

the Playback Menu (☞ pg. 30). •Playback Sound Mode Display

.... set the Power Switch to “ ”. Press

MENU/BRIGHT and set “ON SCREEN” in the Date/Time Menu (☞ pg. 18 – 20) to “ON” or “OFF”. Then, set the Power

Switch back to “ ”.

EN43

MAKE CONNECTIONS

Also refer to pg. 32 and 33.

1 To connect to:

A JVC VCR equipped with a remote pause connector . . .

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the RM-V711U’s PAUSE IN connector.

Insert a recorded tape into the camcorder and set the
2 Power Switch to “	”.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control.

The Random Assemble Editing Menu appears.

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Programme 1.

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

●When editing on a VCR equipped with DV input connector, the DV cable can be connected instead of the S-Video cable and Audio/Video cable.

●Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

CONTINUED ON NEXT PAGE