JVC GR-DVL30 EN7, Using the Battery Pack, Using AC Power, To Detach The Battery Pack, Information

BATTERY RELEASE Switch

B Push in.

A Hook on.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

To DC IN connector

Core filter

AC Power Adapter/Charger

AA-V20EG or AA-V20EK

To AC outlet

DC cord

EN7

USING THE BATTERY PACK

1 Hook the non-terminal end of the battery pack to the camcorder and push the battery pack in until it locks in place .

•If the battery pack is attached in the wrong position, a malfunction may occur.

To Detach The Battery Pack . . .

.... slide BATTERY RELEASE and pull out the battery pack.

Battery pack	LCD monitor on/	LCD monitor off/	STARTED
Approximate recording time
	Viewfinder off	Viewfinder on	GETTING
BN-V207U	50 min.	60 min.
	(25 min.)	(30 min.)
BN-V214U	1 hr. 55 min.	2 hrs. 20 min.
(optional)	(60 min.)	(1 hr. 10 min.)
BN-V856U	7 hrs.	8 hrs. 30 min.
(optional)	(4 hrs.)	(4 hrs. 30 min.)

( ) : when the video light is on (GR-DVL40/DVL30 only).

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or Record-Standby mode is engaged repeatedly.

•The LCD monitor is used repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80EG or AA-V80EK AC Power Adapter/ Charger.

Read the VU-V856KIT’s instruction manuals before using. It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80EG or AA-V80EK AC Power Adapter/ Charger.

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration).

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●For other notes, ☞ pg. 6.

To DC OUT connector