JVC GR-DVL30 Scene transition does not, Mode is set to OFF, Fade-In or Fade-Out is, Progress

					EN	51
SYMPTOM	POSSIBLE CAUSES		CORRECTIVE ACTION
16. Scene transition does not	16. •When using “Picture Wipe/	16.
go as expected.	Dissolve” (☞ pg. 22), there
	is a delay of a fraction of a
	second between the
	previous record stop-point
	and the Dissolve start-point.			————
	This is normal, but this slight
	delay becomes especially
	noticeable when shooting a
	fast-moving subject or
	during rapid panning.
17. The Video Echo mode	17. •The Picture Wipe or	17. •Make sure the Squeeze
does not work.	Dissolve functions are in use.		mode is set to “OFF”
	•The Squeeze mode is selected		(☞ pg. 18, 19).
	in the Mode Menu.		•Do not try to use the Video
	•A Fade-In or Fade-Out is in		Echo mode during a Fade-In
	progress.		or Fade-Out (☞ pg. 24).
18. Even when Slow Shutter is	18. •When shooting in the dark,	18. •If you want the lighting to
not selected, the image	the unit becomes highly		look more natural, set GAIN
looks like it is activated.	sensitive to light and the		UP to “AGC” or “OFF” in
	image takes on an effect		the Mode Menu (☞ pg. 18,
	similar to Slow Shutter.	19).
19. There is no strobe when	19. •The Picture Wipe or	19. •Do not try to use the Classic
the Classic Film or Strobe	Dissolve function is in use.		Film or Strobe mode during
mode is activated.			a scene transition
			(☞ pg. 24).
20. White Balance cannot be	20. •The Sepia or Monotone	20. •Turn off Sepia or Monotone
activated.	mode is activated.		before setting White
			Balance (☞ pg. 24).
21. When shooting a subject	21. •This is a result of exceed-	21.
illuminated by bright light,	ingly high contrast, and is			————
vertical lines appear.	not a malfunction.
22. When the screen is under	22. •This is not a malfunction.	22.
direct sunlight during
shooting, the screen				————
becomes red or black for
an instant.
23. During recording, the date/	23. •“DISPLAY” is set to “OFF” in	23. •Set “DISPLAY” to “ON” in
time does not appear.	the Date/Time Menu.		the Date/Time Menu
	•Self-Recording is performed.		(☞ pg. 21).
			•During Self-Recording, the
			date/time does not appear
			(☞ pg. 13).
			•Set “INDICATION” to “ON”
			in the Date/Time Menu
			(☞ pg. 21).
24. The indicators and	24. •“ON SCREEN” is set to	24. •Set “ON SCREEN” to “ON”
messages do not appear.	“OFF” in the Date/Time		in the Date/Time Menu
	Menu.		(☞ pg. 21).
	•You have made the		•Set “INDICATION” to “ON”
	indicators disappear.		in the Date/Time Menu
			(☞ pg. 21).

CONTINUED ON NEXT PAGE