JVC GR-DVL505, GR-DVL805 specifications 20 EN, Slide the Power Zoom Lever towards T, Zoom Out

Page 20

20 EN

RECORDING Basic Recording For Video And D.S.C.

Zoom in (T: Telephoto)

1 xW

T

 

 

 

 

1 0 xW

T

 

 

 

 

20xW

T

 

 

 

 

40xW

T

Zoom out (W: Wide angle)

Zoom display

1 0 xWT

Digital zoom zone

10X (optical) zoom zone

Approximate zoom ratio

Power Zoom Lever

FEATURE: Zooming

PURPOSE:

To produce the zoom in/out effect, or an instantaneous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the quicker the zoom action.

NOTES:

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby,

lock the focus by using the manual focus

(  pg. 23), then zoom in or out in Record mode.

Zooming is possible to a maximum of 250X, or it

can be switched to 10X magnification using the optical zoom (  pg. 25).

Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.

During Digital zoom, the quality of image may suffer.

Digital zoom cannot be used when digital image

processing, such as Picture Wipe/Dissolve

(  pg. 28, 29) or Video Echo (  pg. 30), is activated.

Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in the Menu Screen on page 26.

Power Switch

Image 20
Contents GR-DVL805 GR-DVL505 Dear Customer It is recommended that youPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsSafety Precautions Make sure you only use cassettes with the Mini DV markAC Power Adapter/Charger Remote Control Unit AA-V40U RM-V716U AAA R03 Battery x Shoulder StrapFor remote control unit Editing CableAutomatic Demonstration Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures About BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preferenceEN13 During playback of a tape recorded on anotherPicture Quality Mode Setting 14 ENOperation Mode Power Switch Position ManualVIDEO/DSC Switch Position EN15Power  pg To Adjust The Brightness Of The Display16 EN Load a Cassette  pgEN17 Journalistic ShootingSELF-RECORDING During recording, sound is not heard from the speakerPower Switch Snapshot For Video Recording Snapshot Mode Selection18 EN Snapshot RecordingBasic Shooting Snapshot Available Snapshot modes are the same as those on pgImage is stored in the camcorder’s built-in memory To Delete Unwanted Still ImagesSlide the Power Zoom Lever towards T 20 ENZoom Zoom OutProper recording When a blank portion is recorded on a tapeEN21 Feature Video Light To brighten the scene when natural lighting is too dim22 EN Set Light OFF/AUTO/ON as requiredFeature Auto Focus Feature Manual FocusEN23 To obtain correct focusSee pg Go to stepMenu Screen Explanations EN25Side LED indicator  p , 75 lights on the camcorder when Power Switch is set to orWhen shooting subjects with vertical or horizontal stripes When shooting dark or dim subjectsEN27 Fade/Wipe Effects Picture Wipe or Dissolve SelectionTo Deactivate The Selected Effect Sound at the end of the last recorded scene is not storedMenu EN29Fader And Wipe Menu To Deactivate The Selected Mode Program AE With Special EffectsSlow Slow Shutter SlowEN31 Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationTo Return To Automatic White Balance To Change The Tint For RecordingTo Control The Speaker Volume Available only with the remote control provided  pgEN33 Playback Zoom and Playback Special EffectsUsing Menus For Detailed Adjustment EN35 Playback SoundDisplay Set the VIDEO/DSC Switch to Power Switch to36 EN Normal PlaybackEN37 Index ScreenIndex Playback 38 EN Slide ShowTo stop the Slide Show, press After , press 4/6. To stop the Slide Show, pressProtecting Images EN39To Protect AN Image To Remove Protection40 EN To Delete ALL ImagesYou can initialize the camcorder’s built-in memory anytime Initializing The Built-in MemoryEN41 42 EN VCRTo monitor the picture and sound from If using a VCR . . . go to step If not . . . go to stepEN43 Date/time information cannot be captured into the PC 44 ENConnection To a Personal Computer Make sure all units are turned off Connection To a Video Unit Equipped With a DV ConnectorEN45 46 EN Dubbing To a VCRCore filter reduces interference YTU94146A S-Video cableTo use this camcorder as a player Make sure the camcorder’s power is offEN47 Memory To a Tape Indicator disappears when dubbing is complete48 EN Dubbing Images Recorded On a Tape To The Built-in Memory EN4950 EN Installing The BatteriesRe-attach the battery compartment cover EN51 FF ButtonFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom 52 ENFeature Playback Special Effects EN5354 EN Random Assemble Editing R.A.EditSET REMOTE/VCR Code You are now ready to try Random Assemble EditingJVC VCR equipped with a remote pause connector EN55Make Connections VCR other than above56 EN Select ScenesEN57 Automatic Editing to VCR58 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing EN5960 EN Audio DubbingTo hear the dubbed sound during playback Sound is not heard from the speaker during Audio DubbingInsert Editing EN61Focus does not adjust automatically Clean the lens and check62 EN Corrective ActionEN63 Digital Zoom does not workEffects you want before For editing was registered Starting editing  pgTroubleshooting 64 ENEN65 Images stored in the built- in memory cannot be deletedWhen the LCD monitors 66 ENAngle of the LCD monitor WhitishOr channel appropriate EN67An unusual mark appears 68 EN Function Mode  pgDuring Video Recording Only 70 EN Auto PhotoEN71 LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the battery remaining power Appears when no tape is loaded  pgSwitch is set to or and the VIDEO/DSC Switch is set to VIDEO/DSC Switch is set to VideoAppears when the date/time is not set  pg For replacementVIDEO/DSC Switch is set to Audio  pg74 EN 345 6 7 # $ %EN75 After Use Cleaning The Camcorder76 EN To prevent damage and prolong service life Temperature Range SpecificationsEN77 To avoid hazards . . .Terminals78 EN EN79 80 EN  pg , 9Date/Time Display  pg , 34 Icons  pgEN81 82 EN For GeneralFor Digital Video Camera For Digital Still CameraFor Connectors EN83GR-DVL505