JVC GR-DVL505, GR-DVL805 48 EN, Memory To a Tape, Indicator disappears when dubbing is complete

48 EN DUBBING (cont.)

Dubbing Images Stored In The Built-in

Memory To A Tape

Images can be dubbed from the camcorder’s built-in memory to a tape.

1 Load a cassette (
pg. 12).

2 To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point.

Power Switch			32
		YOFF
	A
P	L
Recording			4
			3
Start/Stop Button
Lock Button

Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

To select a still image to be dubbed, perform Index Playback (
pg. 37) or press 2or 3 to select the image you wish.

Rewind Button (2)

Fast-Forward

Button (3)

5 To engage Dub-Standby, press the Recording Start/ Stop Button. The message “TO COPY TO TAPE PUSH START/STOP” appears.

6 While the message is being displayed, press the Recording Start/Stop Button. The selected still image is recorded on the tape for approx. 5 seconds.

•The indicator disappears when dubbing is complete.

NOTE:

If the Recording Start/Stop Button is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

	Display
TO COPY TO TAPE
PUSH	S TART / S TOP

REC

444