PLAYBACK Basic Playback For Video | EN33 |
Rewind Button (2)
Stop Button (5)
Play/Pause Button (4/6)
Power Zoom
Lever (VOL.)
1 Load a tape ( pg. 12).
2 Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.
•To stop playback, press 5.
•Press 2to rewind, or 3to
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards
Speaker
VIDEO/DSC Switch (Open the LCD monitor to access this switch)
|
|
| OFF |
|
| Y | |
| A |
| |
P | L |
|
|
|
|
|
Lock Button
Power Switch
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to
“OFF”, then to “ ”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 42).
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “ ” does not appear.
•During Stop mode, none of the indications are displayed.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
Still Playback: Pauses during playback.
1)Press 4/6 during playback.
2)To resume normal playback, press 4/6 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When 4/6is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
Shuttle Search: Allows
1)Press 3for forward or 2for reverse search during playback.
2)To resume normal playback, press 4/6.
●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
1)Engage Still Playback.
2)Rotate the MENU/BRIGHT wheel towards “+” for forward
To resume normal playback, press 4/6.
●You can also use the provided remote control for