JVC GR-SXM47 specifications 20 EN, Program AE With Special Effects

Page 20

20EN

RECORDINGAdvancedFeatures(cont.)

P.AE Button

Program AE With Special Effects

 

1 Set the Power Switch to “ ”.

 

Press P.AE repeatedly until the desired mode’s name

 

2 and indication appear.

 

They are displayed for approx. 2 seconds, then the

 

name disappears so that only the indication remains.

 

The mode is activated.

 

To cancel the effect, press P.AE repeatedly until “OFF”

 

3 appears. “OFF” is displayed for approx. 2 seconds.

Power Switch

NOTES:

Only one mode can be engaged at a time.

The screen becomes slightly dark in the High Speed Shutter mode. Use in well-lit situa- tions.

In the “High Speed Shutter” or “Sports” modes, picture colour may be adversely affected if the subject is lit by alternating discharge-type light sources such as flourescent or mercury-vapour lights.

SPORTS

High shutter speed clearly captures fast-moving action.

ND : ND EFFECT

A black mist darkens the picture, as when an ND filter is used. Helps to counter the effects of glare on the subject.

FG : FOG

Makes the picture look misty white, as when an external fog filter is attached to the lens. Softens the image and gives it a “fantasy” look.

TWILIGHT

Dusk, twilight scenery, fireworks, etc., look more natural and dramatic. The following happens when Twilight mode is selected:

•Auto gain control is turned off.

•White Balance is set to “:FINE” (day mode), but can also be manually changed to another mode (pg. 29).

•Auto Focus becomes available only in the range of 10 m to infinity. To focus when the subject-to-camera distance is less than 10 m, use manual focusing (pg. 28).

S1/2000

(1/2000 sec. High Speed Shutter)

Captures faster action than Sports mode.

Image 20
Contents GR-SXM47 GR-SX22 GR-FXM37 GR-FX12 It is recommended that you Connection to the mains supply in the United KingdomEN3 Do not block the ventilation holesShoulder Strap Core Filter x Power Cord Battery PackAC Adapter AP-V10EG Lens Cap Cable Adapter EN5 How To Attach The Core FilterHow To Attach The Lens Cap To Detach The Battery Pack Slide Battery Release and pull out the battery packPerform of Charging the Battery Pack pg EN7Approximate recording time unit min Use the AC Adapter connect as shown in the illustrationGrip Adjustment Viewfinder AdjustmentTripod Mounting Shoulder Strap AttachmentRotate Menu to select Date/Time SettingsComes on Recording Format Setting 10 ENRegular VHS VCR EN11RecordingPlayback Recording Mode Setting Tape Length SettingLoading/Unloading a Cassette EN1314 EN Shooting While Watching The LCD MonitorTo Stop Recording Models equipped with LCD monitor onlyEN15 SELF-RECORDING models equipped with LCD monitor onlySlide the Power Zoom Lever towards T Slide the Power Zoom Lever towards W16 EN Zoom For the next shot EN17 5Sec. Rec 5-Sec. Recording Basic Features Set Light OFF/AUTO/ON as required OFF Turns off the lightFades in/out to a black screen Recording Advanced Features EN19Fade/Wipe Effects 20 EN Program AE With Special EffectsDigital Effects EN21If you select Jlip ID no EN Recording Advanced FeaturesUsing Menus For Detailed Adjustment Refer to Focusing pg AdjustmentAllows you to superimpose one of eight preset titles pg This Menu Screen cannot be accessed while recordingSystem Menu Advanced Features24 EN Date/Time Insert Instant TitlesTime-Lapse Set REC Time and 2 of Animation aboveEN27 Set the Power Switch to Press MENU. The Menu Screen appearsExposure Control Patterns that are regularly repeated Focusing28 EN White Balance Adjustment Manual White Balance OperationEN29 Press Menu again to close the Menu ScreenRotate Bright towards + to brighten, or towards to darken Load a tape pg Set the Power Switch to30 EN Playback Features EN31 If your TV/VCR has a 21-pin connector Basic Connections And Tape DubbingUse the provided Cable Adapter CamcorderPower supply instead of the battery pack pg Basic ConnectionsTape Dubbing EN3334 EN Cassette Adapter optionalWhen the Power Switch is set to or and the LCD monitor is Viewfinder switches off automatically to save power modelsAs necessary before you start shooting Equipped with LCD monitor onlyNo power is supplied Recording cannot be performedRecording does not start Animation or Time-Lapse is notAn error number i.e. E03 appears That Date/Time setting is carried outLens CAP warning indicator may blink when Lens CAP warning indicatorUse only the following battery To prevent damage and prolong service life38 EN To avoid hazardEN39 To prolong service life Cleaning The CamcorderTo prevent damage to the LCD monitor, do not About moisture condensationEN41 42EN 3 4 5 t y @ # $ %EN43 Indications 44 ENIndications During Recording EN45 TBC Indicator Recording Format Indicator S/S-ETIndications During Playback 46 EN Memo EN47 Victor Company of JAPAN, Limited