JVC GR-SXM47 Indications During Playback, EN45, TBC Indicator Recording Format Indicator S/S-ET

Indications During Playback

1	2	3 4		5 6
		S–E T		4
TBC
			– 1 : 2 3 : 4 5
				AT

VOLUME – – – – – –6– – – – – +

EN45

1: Cassette Indicator Displayed when a tape is loaded.

2 TBC Indicator ☞ pg. 31

3Recording Format Indicator (S/S-ET)

(GR-SXM47/SX22 only)		☞ pg. 10
4 Tape Counter		☞ pg. 31
5 Tape Running Indicator
4	: Playback
3 : Fast-Forward/Shuttle Search
2 : Rewind/Shuttle Search
6	: Pause
6 Tracking Indicator		☞ pg. 31
7 •BRIGHT: Bright Level Indicator
(models equipped with		☞ pg. 30
LCD monitor only)
•VOLUME: Speaker Volume Indicator
(models equipped with		☞ pg. 30
LCD monitor only)

7

Warning Indications

Indications		Function
	Displays the battery remaining power.
	Remaining power level: high. It does not necessarily
	mean that the battery pack is fully charged.
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator		blinks (battery
	power warning).
	When the battery power is exhausted, power turns off automatically.
	Blinks when no cassette is loaded, or when the Erase Protection tab is not in the position
	that allows recording.			(☞ pg. 13)
TAPE END	Appears when the tape ends during recording, playback or fast-forward.			(☞ pg. 35)
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
	These 2 warnings appear alternately every 3 seconds if condensation occurs. In this case,
CONDENSATION	all functions except tape eject and power on/off are disabled. Remove the tape, turn the
	unit off (without removing the power supply), wait a few minutes for the warnings to
OPERATION PAUSED
	clear, and turn it on again.
PLEASE WAIT
	These 2 warnings appear alternately every 3 seconds if dirt is detected on the heads
HEAD CLEANING	during recording. In this case, use an optional cleaning cassette. If the warning remains
REQUIRED	after cleaning, consult your nearest JVC dealer.
USE CLEANING
CASSETTE
E01— E06	The error indications (E01 — E06) show what type of malfunction has occured. If an
UNIT IN	error indication and warning appear, turn the unit off, remove the power supply (battery,
SAFEGUARD MODE	etc.) and wait a few minutes for them to clear. When it does, you can resume using the
REMOVE AND	camcorder. If the indication remains, consult your nearest JVC dealer.
REATTACH BATTERY