JVC GR-SXM47 specifications EN3, Do not block the ventilation holes

Page 3

EN3

CAUTIONS:

This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor*/viewfinder playback are possible anywhere.

Use the JVC BN-V11U**/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord.

(An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

*Models equipped with LCD monitor only. **GR-FXM37/FX12 only.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone especially children push anything into holes, slots or any other opening in the case

— this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Image 3
Contents GR-SXM47 GR-SX22 GR-FXM37 GR-FX12 Connection to the mains supply in the United Kingdom It is recommended that youDo not block the ventilation holes EN3Power Cord Battery Pack AC Adapter AP-V10EG Lens Cap Cable AdapterShoulder Strap Core Filter x How To Attach The Core Filter How To Attach The Lens CapEN5 Slide Battery Release and pull out the battery pack To Detach The Battery PackUse the AC Adapter connect as shown in the illustration Perform of Charging the Battery Pack pgEN7 Approximate recording time unit minShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingDate/Time Settings Comes onRotate Menu to select 10 EN Recording Format SettingEN11 RecordingPlaybackRegular VHS VCR Tape Length Setting Recording Mode SettingEN13 Loading/Unloading a CassetteModels equipped with LCD monitor only 14 ENShooting While Watching The LCD Monitor To Stop RecordingSELF-RECORDING models equipped with LCD monitor only EN15Zoom Slide the Power Zoom Lever towards TSlide the Power Zoom Lever towards W 16 ENEN17 5Sec. Rec 5-Sec. RecordingFor the next shot Set Light OFF/AUTO/ON as required OFF Turns off the light Basic FeaturesRecording Advanced Features EN19 Fade/Wipe EffectsFades in/out to a black screen Program AE With Special Effects 20 ENEN21 Digital EffectsEN Recording Advanced Features Using Menus For Detailed AdjustmentIf you select Jlip ID no This Menu Screen cannot be accessed while recording Refer to Focusing pgAdjustment Allows you to superimpose one of eight preset titles pgAdvanced Features 24 ENSystem Menu Instant Titles Date/Time InsertSet REC Time and 2 of Animation above Time-LapseSet the Power Switch to Press MENU. The Menu Screen appears Exposure ControlEN27 Focusing 28 ENPatterns that are regularly repeated Press Menu again to close the Menu Screen White Balance AdjustmentManual White Balance Operation EN29Load a tape pg Set the Power Switch to 30 ENRotate Bright towards + to brighten, or towards to darken Playback Features EN31 Camcorder If your TV/VCR has a 21-pin connectorBasic Connections And Tape Dubbing Use the provided Cable AdapterEN33 Power supply instead of the battery pack pgBasic Connections Tape DubbingCassette Adapter optional 34 ENEquipped with LCD monitor only When the Power Switch is set to or and the LCD monitor isViewfinder switches off automatically to save power models As necessary before you start shootingAnimation or Time-Lapse is not No power is suppliedRecording cannot be performed Recording does not startLens CAP warning indicator An error number i.e. E03 appearsThat Date/Time setting is carried out Lens CAP warning indicator may blink whenTo avoid hazard Use only the following batteryTo prevent damage and prolong service life 38 ENEN39 About moisture condensation To prolong service lifeCleaning The Camcorder To prevent damage to the LCD monitor, do notEN41 3 4 5 t y @ # $ % 42ENEN43 44 EN Indications During RecordingIndications TBC Indicator Recording Format Indicator S/S-ET Indications During PlaybackEN45 46 EN Memo EN47 Victor Company of JAPAN, Limited