24EN
RECORDING
AdvancedFeatures(cont.)
SYSTEM MENU (cont.)
ON | Records in | ||
ET*) |
|
| |
OFF | Records in VHS on a VHS or | ||
SX22 only) | |||
|
|
| |
TAPE LENGTH | Allows you to set the tape length depending on the tape used (☞ pg. 12). | ||
|
|
| |
DISPLAY | FULL | Make all of the indications appear on the LCD monitor**/ | |
|
| viewfinder during playback or recording. | |
| SIMPLE | Make the following indications disappear from the LCD | |
|
| monitor**/viewfinder during recording or playback: cassette | |
|
| warning, tape remaining time, battery pack remaining power | |
|
| indicator and tape length indicator (☞ pg. 44, 45) | |
|
|
| |
REC TIME | Refer to “Animation” and | ||
|
|
| |
INT. TIME | Refer to | ||
|
|
| |
TELE MACRO | OFF | Usually the distance to a subject where the lens is in focus | |
|
| depends on the zoom magnification. Unless there is a distance of | |
|
| more than 1 m to the subject, the lens is out of focus at the | |
| ON | maximum telephoto setting. When set to “ON”, you can shoot a | |
| subject as large as possible at a distance of approx. 60 cm. | ||
|
| ||
|
| •Depending on the zoom position, the lens may go out of focus. | |
|
|
| |
TITLE LANG. | Allows you to select the language (ENGLISH or FRENCH) of Instant Titles | ||
| (☞ pg. 25). |
| |
|
|
| |
DATE/TIME | Allows you to set the current date and time (☞ pg. 9). | ||
|
|
| |
JLIP ID NO. | This number is necessary when connecting the camcorder to a device such as a computer | ||
| using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06. | ||
|
|
| |
DEMO MODE | ON | Demonstrates certain functions automatically. When “DEMO | |
|
| MODE” is set to “ON” and the Menu Screen is closed, the | |
|
| demonstration starts. | |
|
| Operating the Power Zoom Lever during the demonstration | |
|
| stops the demonstration temporarily. If the Power Zoom Lever is | |
|
| not moved for more than 1 minute after that, the demonstration | |
|
| will resume. | |
|
| NOTE: | |
|
| When a tape whose Erase Protection tab is in the position that | |
|
| allows recording is loaded in the camcorder, demonstration is | |
|
| not available. | |
| OFF | Automatic demonstration will not take place. | |
|
|
|
*
**Models equipped with LCD monitor only.
: