JVC GZ-HD620U Troubleshooting, Recording Getting Started, Action Battery pack is being charged

Troubleshooting

Before requesting service, consult the following chart or the “Troubleshooting” section in the Detailed User Guide.

If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC’s website.

Refer also to the Q&A information of new products on JVC’s website (http:// www.jvc.com).

This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, reset this unit.

■Reset this unit when it does not function properly or when “...

Error” appears on the screen.

①Turn off the power. (Close the LCD monitor.)

②Remove the AC adapter and battery pack from this unit, reattach them, and turn on the power again.

Recording Getting Started

Troubleshooting

	Trouble
Power	POWER/CHARGE lamp
	starts blinking when the
	monitor is closed.

Action	Page
● The battery pack is being charged.	6

Playback

Recording

Recording/snapshot cannot be performed.

Recording stops by itself.

● Check the A / B mode.	5
● Set to the recording mode with the L	14
button.
● Turn off this unit, wait for a while, and	-
turn it on again. (This unit stops
automatically to protect the HDD when
the temperature rises.)
● Move this unit away from loud or shaky	-
places.
● Insert a commercially available	13
microSD card, and set “REC MEDIA
FOR VIDEO” and “REC MEDIA FOR
IMAGE” in the media settings menu to
“SD”. (There may be a malfunction
with the HDD.)
● Recording stops automatically after 12	-
hours of non-stop recording.

OthersCopying

For more information, refer to the Detailed User Guide	25
http://manual.jvc.co.jp/index.html/