Necessary Settings before Use
Charging the Battery Pack
1 Close the LCD monitor to turn off the camera.
2 Attach the battery pack.
Slide the battery pack down until it locks in place.
Bottom of the Camera
BATT.
3 Connect the AC adapter.
DC Jack
AC Adapter
To AC Outlet (110V to 240V)
•You can also connect the AC adapter using the Everio dock connector.* ( pg. 9)
*
•The access/charge lamp blinks to indicate charging has started.
•When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera
LTo detach the battery pack
Slide and hold BATT. ( step 2), then remove the battery pack.
LTo check the remaining battery power See page 15.
NOTES
•You can also use the camera with just the AC adapter.
•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.
Date/Time Setting
1 Open the LCD monitor to turn on the camera.
2 When [SET DATE/TIME!] appears, select [YES] within 10 seconds.
SET DATE/TIME!
YES
NO
If you do not select within 10 seconds, the screen disappears. In such case, press the POWER button and turn the camera on again.
3 Set the date and time.
DATETIME
JAN 31 2007 11 07 AM
Repeat this step to input the month, day, year, hour and minute.
LTo change the date and time
1)Touch the MENU button.
2)Select [BASIC SETTINGS], and then [CLOCK ADJUST].
3)Set the date and time.
LTo return to the previous screen Select @.
LTo quit the screen Touch the MENU button.
14