JVC GY- HD111 HD CAMERA RECORDER manual Battery Operation, Charging the Battery Pack

Page 29

PREPARATIONS

Battery Operation

AC outlet	AC cord

AC adapter

Battery pack

CHARGE lamp 1

POWER lamp

CHARGE lamp 2

Charging the Battery Pack

Before use the battery pack should be charged using the pro- vided AC Adapter.

*Be sure to pull the DC cable out of the AC adapter when you charge the battery.

1.Plug the AC cable of the AC Adapter into an AC outlet. The POWER lamp illuminates.

2.While pushing the battery pack down, slide it in the direc- tion of the arrow to mount it on the AC Adapter. Charging starts, and the CHARGE lamp blinks green. It changes to light steadily when charging is completed.

3.When charging is completed, remove the battery pack by sliding it in the opposite direction of the mounting direc- tion.

Connector

Battery pack

Lock release lever

Attaching the Battery Pack on the GY-

HD110

If the DC cable is connected to the GY-HD110, unplug the cable.

1.Hold the battery pack with the connector side facing the GY-HD110.

2.While pressing the battery pack against the GY-HD110, slide it downward to attach it to the GY-HD110.

Detaching the Battery Pack from the GY-

HD110

Ensure that the POWER switch on the GY-HD110 is set to OFF.

1.While sliding the battery pack lock release lever, slide the battery pack upward to remove it.

CAUTION

Do not detach the battery pack while recording is taking place.

MEMO

•Do not connect or disconnect the DC cable while operat- ing with a battery pack.

The following symptoms may occur if the DC cable is connected or disconnected while operating with a battery pack.

•The power is cut off for a moment when the DC cable is disconnected.

•Noise to the video and audio signals occurs. Audio sig- nal are muted.

•When operation is continued with DC input after the bat- tery pack capacity has been used up, set the POWER switch to OFF after the DC power is applied. Then switch ON again.

•If the GY-HD110 is left with the battery pack attached, a small amount of power is consumed even if the POWER switch on the GY-HD110 is set to OFF.

Remove the battery pack when the GY-HD110 is not going to be used.

33

Image 29

Contents For Customer Use GY-HD111Excluding the CHU/CHE Model LensMicrophone AccessoriesMain Features Contents Contents Th16 x 5.5BRMU CONTROLS, Indicators and ConnectorsZoom Lens Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the ViewfinderIndications on the LCD Monitor and in the Viewfinder Cont’d „ Status Screens in the Camera ModeSetting Status Contents of Indications Contents See ND1 Filter ND1 1/4ND CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ Indication Indication Contents „ Status Screen in VTR Mode NDF „ Magnified Status Indications on the LCD Monitor„ Menu Setting Screen „ Auto White Balance Indication Camera Mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Basic System PreparationsAttaching the Zoom Lens How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory cardAC Operation „ Charging the Built-in Battery„ How to charge „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d „ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Displaying the Time and Date on the Screen Setting and Displaying the Date and Time Cont’d„ Setting the Date and Time Displaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Zero-resetting the Time Code or User’s Bit Data „ Presetting time cord data„ Presetting user’s bit data Slave unit GY-HD110U/GY-HD111E „ Settings and Operations„ Connections Viewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionND Filter Camera SettingsScreen Size 43/169 Mode Selection „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during Recording„ About the Focus Assist Function Shooting OperationBasic Recording Operation Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Operation Backup Recording„ Settings Menu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Video Format Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative AutoOFF Camera Operation Menu Screen3200K Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenStop Color Matrix Adjust Menu ScreenSkin Color Adjust Menu Screen REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep None20dB AUDIO/MIC 1/2 Menu Screen50dB 48KCH1/2 AUDIO/MIC 2/2 Menu ScreenMIX Blue LCD/VF 1/3 Menu Screen70-80% Voltage LCD/VF 2/3 Menu ScreenColor LCD/VF 3/3 Menu ScreenDrop TC/UB/CLOCK Menu ScreenExecute Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYBlink Others 1/2 Menu Screen3MIN 1394 Others 2/2 Menu ScreenOthers 2/2 Menu Screen Cont’d Menu ALL ResetDR-HD100 A.OFF Drum Hour„ Displaying the File Manage menu Screen „ Loading a menu settings fileFile Manage Menu Screen File Manage Menu Screen Cont’d „ Saving settings„ Error displays „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settings„ Setting the skin detail function color and range Features of the Camera SectionHow to Use Skin Detail „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD110 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories