JVC GY- HD111 HD CAMERA RECORDER manual Monitoring Audio during Recording, Low/Middle/High

Page 45

SETTING AND ADJUSTMENTS BEFORE SHOOTING

PHONES jack

CAUTION

•When the AUDIO INPUT switch is set to MIC, be sure to check that the microphone is connected to the INPUT1/2 connector. If the microphone is not connected, increasing the audio level could cause noise from the input connec- tor to be recorded on the tape. When the microphone is not connected to the INPUT1/2 connector, set the AUDIO INPUT switch to “LINE” or turn down the audio level con- trol.

•In the FULL AUTO mode, the audio level volume cannot be adjusted with the audio level controls on the CH-1 and CH-2.

MEMO

The reference level for audio recorded on the tape can be set with the AUDIO REF. LEVEL item on the AUDIO/MIC menu screen. (–20 dB or –12 dB) The level will change for both CH-1 and CH-2.

Monitoring Audio during Recording

The audio input during recording, in record-pause or stop mode can be monitored through the monitoring speaker or earphone.

•Select the audio channel to be monitored using the MONI- TOR SELECT switch.

CH-1 : The sound input to the CH-1 channel is output.

BOTH : The sound input to the CH-1 and CH-2 channels is output mixed.

CH-2 : The sound input to the CH-2 channel is output.

•The MONITOR volume control adjusts the monitoring vol- ume.

•The loudspeaker or earphone outputs an alarm tone in the case of an abnormal condition occurring in the unit.

An alarm tone is also output when the tape end is reached or when the battery is running down.

*Do not increase the audio monitoring volume exces- sively; otherwise howling with the camera microphone may occur.

MEMO

•When connecting a stereotype earphone, make the fol- lowing settings to output stereo sound.

1Set the MONITOR SELECT switch to BOTH.

2Set the AUDIO MONITOR item on the AUDIO/MIC [2/2] menu screen to STEREO.

•When AUDIO MONITOR item on the AUDIO/MIC [2/2] menu screen is set to “STEREO”, only the audio of CH-1 is output from the monitoring speaker.

•The volume of the alarm tone is set with the ALARM VR LEVEL item on the OTHERS [1/2] menu screen. (OFF/

LOW/MIDDLE/HIGH)

49

Image 45

Contents For Customer Use GY-HD111Excluding the CHU/CHE Model LensMicrophone AccessoriesMain Features Contents Contents CONTROLS, Indicators and Connectors Zoom LensTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the Viewfinder„ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See CH-1O O O O O O O O O \ \ \ CH-2O O O O O O O O O \ \ \ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode NDF „ Magnified Status Indications on the LCD Monitor„ Menu Setting Screen „ Auto White Balance Indication Camera Mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Basic System PreparationsAttaching the Zoom Lens How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ Charging the Built-in Battery „ How to chargeAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d „ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and TimeSetting and Displaying the Date and Time Cont’d „ Setting the Date and Time„ Displaying the Time and Date on the Screen Displaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting time cord data „ Presetting user’s bit data„ Zero-resetting the Time Code or User’s Bit Data „ Settings and Operations „ ConnectionsSlave unit GY-HD110U/GY-HD111E Viewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionCamera Settings Screen Size 43/169 Mode SelectionND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingShooting Operation Basic Recording Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF Backup Recording „ Settings„ Operation Menu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative AutoCamera Operation Menu Screen 3200KOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenColor Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep None20dB AUDIO/MIC 1/2 Menu Screen50dB 48KAUDIO/MIC 2/2 Menu Screen MIXCH1/2 LCD/VF 1/3 Menu Screen 70-80%Blue Voltage LCD/VF 2/3 Menu ScreenColor LCD/VF 3/3 Menu ScreenTC/UB/CLOCK Menu Screen ExecuteDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYOthers 1/2 Menu Screen 3MINBlink 1394 Others 2/2 Menu ScreenOthers 2/2 Menu Screen Cont’d Menu ALL ResetDR-HD100 A.OFF Drum Hour„ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsFeatures of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD110 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories