JVC GY- HD111 HD CAMERA RECORDER manual Presetting and Recording of Time Code, Drop, Non

Page 36

PREPARATIONS FOR OPERATION

Recording Time Codes in Continuation of Time Codes Recorded on Tape

The GY-HD110 also incorporates a time code reader. There- fore, when the unit enters record mode from record-standby mode, it can read the time code data recorded on the tape and record time codes in continuation of the existing data. The recorded user’s bit data are identical to the user’s bit data recorded on tape.

*However, approximately ±1-frame variations may occur in scene accuracy.

To enable this function, set the time code related switches as follows before starting recording.

„Setting

Set the TC GENE. switch inside the LCD door to REGEN.

MEMO

The time code framing mode automatically becomes the mode (drop frame or non drop frame) already recorded on the tape.

Presetting and Recording of Time Code

TC/UB/CLOCK menu screen

(FRAME RATE: 60/30)

The time codes from the internal time code generator can be recorded at the time of recording scenes.

•The TC/UB/CLOCK menu screen differs depending on whether the FRAME RATE item on the VIDEO FORMAT menu screen is “60/30” or “50/25”.

Framing mode:

Drop frame/

Non-drop setting

TC/UB/CLOCK menu screen

(FRAME RATE: 50/25)

To preset the Time Code, make the following settings.

„TC GENE. switch Set to REC or FREE.

REC

: The data preset in the time code generator

 

runs only during recording.

 

Use this setting if it is necessary to record

 

continual time codes across different scenes.

 

* However, approximately ±1-frame varia-

 

tions may occur in scene accuracy.

FREE

: The time code starts to run from the time it is

 

preset in the time code generator.

„TC/UB/CLOCK menu screen (FRAME RATE: 60/30)

Use the DROP/NON DROP item to select the framing mode for the time code generator.

DROP

: The time code generator’s running method is

 

set the drop frame mode.

 

Use this setting when placing emphasis on

 

the recording time.

NON

: The time code generator’s running method is

DROP

set to the non drop frame mode.

 

Use this setting when placing emphasis on

 

the number of frames.

MEMO

Drop frame/Non-drop frame mode

In the NTSC system, the actual number of frames per 1 sec- ond is approximately 29.97 frames, but per time code 30 frames are processed. To compensate for this difference, the mode called “drop mode” drops frame 00 and 01 for every minute not divisible by 10.

The “non-drop frame mode” is when no frames are dropped and the actual time shift neglected.

„TC/UB/CLOCK menu screen (FRAME RATE: 50/25) Whether or not user’s bit data should be recorded can be selected with the UB REC item on the TC/UB/CLOCK menu screen.

40

Page 35 Page 37
Image 36
Page 35 Page 37
Contents GY-HD111 For Customer UseAccessories Excluding the CHU/CHE Model LensMicrophoneMain Features Contents Contents CONTROLS, Indicators and Connectors Zoom LensTh16 x 5.5BRMU Front Section Rear Section 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch 3TC Display TC/UB display switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section BGAIN Sensitivity selector switch CWHT.BAL White balance switchDStand HHDV/DV LEDLeft Side Section Top Section GVTR VTR indicator Top Section Cont’dFDISPLAY Display button KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status Screens„ Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See CH-1O O O O O O O O O \ \ \ CH-2O O O O O O O O O \ \ \ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Magnified Status Indications on the LCD Monitor NDF„ Auto White Balance Indication Camera Mode only „ Menu Setting Screen„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Preparations Basic SystemHow to Attach the Viewfinder Attaching the Zoom LensAttaching the Microphone Provided KnobInserting an SD Memory Card About the Viewfinder Cable„ Inserting an SD Memory Card „ Taking out the SD memory card„ Charging the Built-in Battery „ How to chargeAC Operation Battery Operation „ Charging the Battery Pack„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d Turning the Power on „ Turning the Power on„ Turning the Power OFF Preparations for OperationLoading/Unloading the Cassette „ Cassette Loading„ Unloading the Cassette ModeSetting and Displaying the Date and Time „ Setting the Date and Time StyleSetting and Displaying the Date and Time Cont’d „ Setting the Date and Time„ Displaying the Time and Date on the Screen „ Setting Displaying Time CodePresetting and Recording of Time Code Drop frame/Non-drop frame modeDrop NON„ Presetting time cord data „ Presetting user’s bit data„ Zero-resetting the Time Code or User’s Bit Data „ Settings and Operations „ ConnectionsSlave unit GY-HD110U/GY-HD111E Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance Adjustment „ White Balance Adjustment„ Adjustment procedure „ Error messagesSetting the Video Format „ Setting the Frame Rate Item„ Setting the REC Item „ About the Motion Smooth FunctionCamera Settings Screen Size 43/169 Mode SelectionND Filter Audio Input Signal Selection „ Selecting the audio signal input„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGHShooting Operation Basic Recording Operation„ About the Focus Assist Function „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Playback Mode Playback ProcedureFast-Forward, Rewind SearchOutputting Audio MIXStereo Monitor PB Audio CH DVUsing External Components Connecting the Video Signal Cables„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF Backup Recording „ Settings„ Operation Menu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo Format Menu Screen Connector G Unconnected Connected Output Signal Initial settings U model 7.5% E model 0.0%Native AutoCamera Operation Menu Screen 3200KOFF Camera Process 1/2 Menu Screen MiddleHigh NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardColor Matrix Adjust Menu Screen Skin Color Adjust Menu ScreenStop Switch Mode Menu Screen REC Item Setting for Step Setting for VariableStep NoneAUDIO/MIC 1/2 Menu Screen 20dB50dB 48KAUDIO/MIC 2/2 Menu Screen MIXCH1/2 LCD/VF 1/3 Menu Screen 70-80%Blue LCD/VF 2/3 Menu Screen VoltageLCD/VF 3/3 Menu Screen ColorTC/UB/CLOCK Menu Screen ExecuteDrop Disable Header REC Menu ScreenTIME/DATE Menu Screen BARS+CAMDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYOthers 1/2 Menu Screen 3MINBlink Others 2/2 Menu Screen 1394Menu ALL Reset Others 2/2 Menu Screen Cont’dDR-HD100 A.OFF Drum Hour„ Loading a menu settings file File Manage Menu Screen„ Displaying the File Manage menu Screen „ Saving settings „ Error displaysFile Manage Menu Screen Cont’d „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory CardFeatures of the Camera Section How to Use Skin Detail„ Setting the skin detail function color and range Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD110 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyHow to Display the Hour Meter Information for Users on Disposal of Old EquipmentEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories
Top Page Image Contents