JVC GY- HD111 HD CAMERA RECORDER manual „ Presetting time cord data, „ Presetting user’s bit data

Page 37

PREPARATIONS FOR OPERATION

Time code (hour, min, sec, frame)

„Presetting time cord data

The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen.

1.Display the TC/UB/CLOCK menu screen.

Select the TC/UB/CLOCK item on the TOP MENU screen.

2.Set the time code (hours, minutes, seconds, frames).

1Rotate the SHUTTER dial to align the cursor (K) with TC PRESET, and then press the SHUTTER dial.

•The first digit of the time code blinks. The blinking digit is the one to be set.

2When the SHUTTER dial is pressed, the blinking digit changes.

3When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

4Repeat the procedure described in 2 and 3 above to set the desired value for all digits.

5After setting the frame digit, press the SHUTTER dial to make EXECUTE blink. The setting values are confirmed when the SHUTTER dial is pressed again.

To cancel the setting, select CANCEL and press the SHUTTER dial.

3.When all the digits are set

•Press the STATUS button to return to the normal screen

or

•Rotate the SHUTTER dial to align the cursor (K) with the PAGE BACK item, and then press the SHUTTER dial to return to the TOP MENU screen.

„Presetting user’s bit data

The user’s bit data are preset with the UB PRESET item on the TC/UB/CLOCK menu screen.

The method for setting is the same as the method for setting the time code described above.

•The user’s bit can be specified using numerals or alpha- betic letters from 0 to F for each digit.

•To record user’s bit data, set the UB REC item to ON.

CAUTION

It is not possible to set all the digits of the user’s bit data to “F”.

Reading of the data during playback will not be possible for an all-F setting.

„Zero-resetting the Time Code or User’s

Bit Data

This is performed with the TC or UB PRESET item on the TC/ UB/CLOCK menu screen. (Performed separately for the time code and the user’s bit data.)

1Rotate the SHUTTER dial to align the cursor (K) with the TC or UB PRESET item, and then press the SHUTTER dial.

2Rotate the SHUTTER dial to select ZERO PRESET as the setting value, and then press the SHUTTER dial.

MEMO

When a menu screen is not being displayed, you can zero reset the time code data by simultaneously holding down the USER2 button and the STOP button for about 1 second.

41

Page 36 Page 38
Image 37
Page 36 Page 38
Contents For Customer Use GY-HD111Excluding the CHU/CHE Model LensMicrophone AccessoriesMain Features Contents Contents Zoom Lens CONTROLS, Indicators and ConnectorsTh16 x 5.5BRMU Front Section Rear Section 3TC Display TC/UB display switch 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchDStand HHDV/DV LEDLeft Side Section Top Section Top Section Cont’d GVTR VTR indicatorFDISPLAY Display button KPLAY/STILL Play/still button„ Status Screens Indications on the LCD Monitor and in the ViewfinderSetting Status Contents of Indications „ Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See CH-2O O O O O O O O O \ \ \ CH-1O O O O O O O O O \ \ \ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode NDF „ Magnified Status Indications on the LCD Monitor„ Menu Setting Screen „ Auto White Balance Indication Camera Mode only„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Basic System PreparationsAttaching the Zoom Lens How to Attach the ViewfinderAttaching the Microphone Provided KnobAbout the Viewfinder Cable Inserting an SD Memory Card„ Inserting an SD Memory Card „ Taking out the SD memory card„ How to charge „ Charging the Built-in BatteryAC Operation „ Charging the Battery Pack Battery Operation„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d „ Turning the Power on Turning the Power on„ Turning the Power OFF Preparations for Operation„ Cassette Loading Loading/Unloading the Cassette„ Unloading the Cassette Mode„ Setting the Date and Time Style Setting and Displaying the Date and Time„ Setting the Date and Time Setting and Displaying the Date and Time Cont’d„ Displaying the Time and Date on the Screen Displaying Time Code „ SettingDrop frame/Non-drop frame mode Presetting and Recording of Time CodeDrop NON„ Presetting user’s bit data „ Presetting time cord data„ Zero-resetting the Time Code or User’s Bit Data „ Connections „ Settings and OperationsSlave unit GY-HD110U/GY-HD111E Viewfinder Adjustment Screen AdjustmentBack Focus Adjustment „ White Balance Adjustment White Balance Adjustment„ Adjustment procedure „ Error messages„ Setting the Frame Rate Item Setting the Video Format„ Setting the REC Item „ About the Motion Smooth FunctionScreen Size 43/169 Mode Selection Camera SettingsND Filter „ Selecting the audio signal input Audio Input Signal Selection„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con NectorLOW/MIDDLE/HIGH „ Monitoring Audio during RecordingBasic Recording Operation Shooting Operation„ About the Focus Assist Function Shooting Operation „ If the Record-Standby Mode ContinuesHeader REC Function Function/Initial Setting„ How to set the Header REC menu screen Playback Procedure Playback ModeFast-Forward, Rewind SearchMIX Outputting AudioStereo Monitor PB Audio CH DVConnecting the Video Signal Cables Using External Components„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Operation Menu Screens Menu Screen ConfigurationSetting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo Format Menu Screen Initial settings U model 7.5% E model 0.0% Connector G Unconnected Connected Output SignalNative Auto3200K Camera Operation Menu ScreenOFF Middle Camera Process 1/2 Menu ScreenHigh Normal108% Camera Process 2/2 Menu ScreenStandard Advanced Process Menu ScreenSkin Color Adjust Menu Screen Color Matrix Adjust Menu ScreenStop REC Item Setting for Step Setting for Variable Switch Mode Menu ScreenStep None20dB AUDIO/MIC 1/2 Menu Screen50dB 48KMIX AUDIO/MIC 2/2 Menu ScreenCH1/2 70-80% LCD/VF 1/3 Menu ScreenBlue Voltage LCD/VF 2/3 Menu ScreenColor LCD/VF 3/3 Menu ScreenExecute TC/UB/CLOCK Menu ScreenDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY3MIN Others 1/2 Menu ScreenBlink 1394 Others 2/2 Menu ScreenOthers 2/2 Menu Screen Cont’d Menu ALL ResetDR-HD100 A.OFF Drum HourFile Manage Menu Screen „ Loading a menu settings file„ Displaying the File Manage menu Screen „ Error displays „ Saving settingsFile Manage Menu Screen Cont’d „ Initializing formatting an SD memory Card „ Resetting the menu settings to the fac Tory settingsHow to Use Skin Detail Features of the Camera Section„ Setting the skin detail function color and range „ Using the Skin Detail Function Features of the Camera SectionOutputting color bars Display Status Action OthersError Code Error Details GY-HD110 Operation Remedy Viewfinder Screen Blinking Pattern Remaining Battery/TapeSymptoms Remedy TroubleshootingInformation for Users on Disposal of Old Equipment How to Display the Hour MeterEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories
Top Page Image Contents