JVC GY- HD111 HD CAMERA RECORDER manual Loading/Unloading the Cassette, „ Cassette Loading, Mode

Page 32

PREPARATIONS FOR OPERATION

Loading/Unloading the Cassette

REC/SAVE

Tape window

switch

 

EJECT switch

Cassette holder

Cassette cover

„Cassette Loading

Use a videocassette tape marked MiniDV.

•To record, slide the switch on the back for use in preventing accidental erasure to the “REC” side.

•Remove any the tape slack before loading.

1.Turn the POWER switch ON.

2.Slide the EJECT switch on the top panel of the camcorder to the side.

The videocassette cover opens automatically and a video- cassette tape can be inserted.

3.Insert a videocassette tape into the videocassette holder. With the tape window facing out, move the switch on the back of the videocassette up and firmly push the center back of the videocassette straight in as far as it will go.

4.Carefully push the center of the videocassette cover in the direction of the arrow as far as it will go to close it.

•After the cover is closed, it takes about 10 seconds until recording can begin or the camcorder can enter stop

mode.

„If the power is on, the modes are as shown below.

MODE

REC/SAVE switch

REC

SAVE

 

Camera

Record-standby mode

STOP mode

 

 

REC INHIBIT is displayed

 

 

on the LCD monitor and in

 

 

the viewfinder.

 

 

 

VTR

STOP mode

 

 

 

 

„Unloading the Cassette

1. Turn the POWER switch to ON.

2.When the camcorder is in shooting standby mode or stop mode, slide the EJECT switch to the side and wait until the videocassette cover opens completely.

•The LED next to the EJECT switch flashes.

A few seconds pass before the videocassette tape is ejected.

3.The LED turns off and the videocassette cover opens.

•Take out the videocassette tape.

4.Carefully push the center of the videocassette cover in the direction of the arrow as far as it will go to close it.

CAUTION

•When you close the videocassette cover, push it in firmly as far as it will go. If the videocassette cover is not closed properly, it becomes half-locked and the camcorder can- not function.

If this happens, firmly push the videocassette cover in again as far as it will go to lock it.

•Do not slide the EJECT switch while recording is in progress.

If you slide the EJECT switch while recording is in progress, the tape is ejected.

•Do not leave the videocassette cover open for a long time.

Dust or dirt may enter the inside and cause damage.

•Do not touch the videocassette cover or interfere with the eject operation while ejecting is in progress. This will cause damage.

36

Page 31 Page 33
Image 32
Page 31 Page 33
Contents GY-HD111 For Customer UseAccessories Excluding the CHU/CHE Model LensMicrophoneMain Features Contents Contents Th16 x 5.5BRMU CONTROLS, Indicators and ConnectorsZoom Lens Front Section Rear Section 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch 3TC Display TC/UB display switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section BGAIN Sensitivity selector switch CWHT.BAL White balance switchDStand HHDV/DV LEDLeft Side Section Top Section GVTR VTR indicator Top Section Cont’dFDISPLAY Display button KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d „ Status Screens in the Camera ModeSetting Status Contents of Indications Contents See ND1 Filter ND1 1/4ND CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ Indication Indication Contents „ Status Screen in VTR Mode „ Magnified Status Indications on the LCD Monitor NDF„ Auto White Balance Indication Camera Mode only „ Menu Setting Screen„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Preparations Basic SystemHow to Attach the Viewfinder Attaching the Zoom LensAttaching the Microphone Provided KnobInserting an SD Memory Card About the Viewfinder Cable„ Inserting an SD Memory Card „ Taking out the SD memory cardAC Operation „ Charging the Built-in Battery„ How to charge Battery Operation „ Charging the Battery Pack„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d Turning the Power on „ Turning the Power on„ Turning the Power OFF Preparations for OperationLoading/Unloading the Cassette „ Cassette Loading„ Unloading the Cassette ModeSetting and Displaying the Date and Time „ Setting the Date and Time Style„ Displaying the Time and Date on the Screen Setting and Displaying the Date and Time Cont’d„ Setting the Date and Time „ Setting Displaying Time CodePresetting and Recording of Time Code Drop frame/Non-drop frame modeDrop NON„ Zero-resetting the Time Code or User’s Bit Data „ Presetting time cord data„ Presetting user’s bit data Slave unit GY-HD110U/GY-HD111E „ Settings and Operations„ Connections Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance Adjustment „ White Balance Adjustment„ Adjustment procedure „ Error messagesSetting the Video Format „ Setting the Frame Rate Item„ Setting the REC Item „ About the Motion Smooth FunctionND Filter Camera SettingsScreen Size 43/169 Mode Selection Audio Input Signal Selection „ Selecting the audio signal input„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGH„ About the Focus Assist Function Shooting OperationBasic Recording Operation „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Playback Mode Playback ProcedureFast-Forward, Rewind SearchOutputting Audio MIXStereo Monitor PB Audio CH DVUsing External Components Connecting the Video Signal Cables„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Operation Backup Recording„ Settings Menu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Video Format Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Connector G Unconnected Connected Output Signal Initial settings U model 7.5% E model 0.0%Native AutoOFF Camera Operation Menu Screen3200K Camera Process 1/2 Menu Screen MiddleHigh NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardStop Color Matrix Adjust Menu ScreenSkin Color Adjust Menu Screen Switch Mode Menu Screen REC Item Setting for Step Setting for VariableStep NoneAUDIO/MIC 1/2 Menu Screen 20dB50dB 48KCH1/2 AUDIO/MIC 2/2 Menu ScreenMIX Blue LCD/VF 1/3 Menu Screen70-80% LCD/VF 2/3 Menu Screen VoltageLCD/VF 3/3 Menu Screen ColorDrop TC/UB/CLOCK Menu ScreenExecute Disable Header REC Menu ScreenTIME/DATE Menu Screen BARS+CAMDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYBlink Others 1/2 Menu Screen3MIN Others 2/2 Menu Screen 1394Menu ALL Reset Others 2/2 Menu Screen Cont’dDR-HD100 A.OFF Drum Hour„ Displaying the File Manage menu Screen „ Loading a menu settings fileFile Manage Menu Screen File Manage Menu Screen Cont’d „ Saving settings„ Error displays „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory Card„ Setting the skin detail function color and range Features of the Camera SectionHow to Use Skin Detail Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD110 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyHow to Display the Hour Meter Information for Users on Disposal of Old EquipmentEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories
Top Page Image Contents