JVC GY- HD111 HD CAMERA RECORDER AC Operation, Charging the Built-in Battery, How to charge

Page 28

PREPARATIONS

AC Operation

		POWER lamp
		To plug outlet
DC INPUT		DC OUT
connector	AC adapter	connector
	Ferrite core

DC cable

The GY-HD110 is operable with AC power supply or battery pack.

Use the supplied AC adapter as the AC power supply.

1.After making sure that the power switches of the GY- HD110 and of the AC adapter are set to OFF, connect the DC cable from the AC adapter to the DC INPUT connec- tor of the GY-HD110 as shown in the illustration.

2.Press the POWER switch of the GY-HD110 to ON. Power is supplied to the VTR section and the camera.

CAUTION

•When using the DC cable make sure to connect the end of the cable with the ferrite core to the AC adapter.

•Do not remove or connect the DC cable while recording is being performed.

•Do not use any power source with large fluctuations in the power source voltage, power sources generating noise, such as ripples or power sources with lower voltage.

Attach the supplied core filter (gray) as shown in the diagram on the right to reduce unwanted electromagnetic emission.

zAttach the core filter as shown in the diagram on the left to this unit as near as possible.

Core filter (gray)

Charging the Built-in Battery

The built-in, rechargeable backup battery retains the date and time and the time code data.

The built-in battery is constantly being charge whenever the GY-HD110 is connected to a power supply, but it gradually discharges while the GY-HD110 is disconnected from a power supply. The battery will be fully discharged when the GY- HD110 is not used for about three months, in which case the set date and time and time code data are reset.

In this case, recharge the built-in battery and then set the date and time and time code data again.

However, it is possible to use the GY-HD110 even if the built- in battery is discharged but the date and time and time code data cannot be recorded.

How to charge

1.Connect the provided AC adapter to the GY-HD110 and an AC outlet or mount a charged battery on the GY- HD110.

2.Set the POWER switch on the GY-HD110 to “ON” or “OFF” (charging takes places with the POWER switch set to either of the positions.)

3.Leave the equipment in this condition for about 4 hours.

•The built-in battery will remain charged for about 3 months after being charged for about 4 hours.

32

Image 28

Contents GY-HD111 For Customer UseAccessories Excluding the CHU/CHE Model LensMicrophoneMain Features Contents Contents Zoom Lens CONTROLS, Indicators and ConnectorsTh16 x 5.5BRMU Front Section Rear Section 2CH-1/CH-2 Audio Select CH-1/CH-2 audio selector switch 3TC Display TC/UB display switch5CAM/VTR Camera/VTR mode switch button LCD DoorRight Side Section BGAIN Sensitivity selector switch CWHT.BAL White balance switchDStand HHDV/DV LEDLeft Side Section Top Section GVTR VTR indicator Top Section Cont’dFDISPLAY Display button KPLAY/STILL Play/still buttonIndications on the LCD Monitor and in the Viewfinder „ Status ScreensSetting Status Contents of Indications „ Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d Contents See CH-2O O O O O O O O O \ \ \ CH-1O O O O O O O O O \ \ \ND1 Filter ND1 1/4ND Indication Indication Contents „ Status Screen in VTR Mode „ Magnified Status Indications on the LCD Monitor NDF„ Auto White Balance Indication Camera Mode only „ Menu Setting Screen„ Alarm Message Display „ Safety Zone Indication Camera mode onlyVF Display Preparations Basic SystemHow to Attach the Viewfinder Attaching the Zoom LensAttaching the Microphone Provided KnobInserting an SD Memory Card About the Viewfinder Cable„ Inserting an SD Memory Card „ Taking out the SD memory card„ How to charge „ Charging the Built-in BatteryAC Operation Battery Operation „ Charging the Battery Pack„ Attaching the Battery Pack on the GY HD110 „ Detaching the Battery Pack from the GY HD110Battery Operation Cont’d Turning the Power on „ Turning the Power on„ Turning the Power OFF Preparations for OperationLoading/Unloading the Cassette „ Cassette Loading„ Unloading the Cassette ModeSetting and Displaying the Date and Time „ Setting the Date and Time Style„ Setting the Date and Time Setting and Displaying the Date and Time Cont’d„ Displaying the Time and Date on the Screen „ Setting Displaying Time CodePresetting and Recording of Time Code Drop frame/Non-drop frame modeDrop NON„ Presetting user’s bit data „ Presetting time cord data„ Zero-resetting the Time Code or User’s Bit Data „ Connections „ Settings and OperationsSlave unit GY-HD110U/GY-HD111E Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance Adjustment „ White Balance Adjustment„ Adjustment procedure „ Error messagesSetting the Video Format „ Setting the Frame Rate Item„ Setting the REC Item „ About the Motion Smooth FunctionScreen Size 43/169 Mode Selection Camera SettingsND Filter Audio Input Signal Selection „ Selecting the audio signal input„ Adjusting Audio during Recording „ Selecting the CH-2 channel input con Nector„ Monitoring Audio during Recording LOW/MIDDLE/HIGHBasic Recording Operation Shooting Operation„ About the Focus Assist Function „ If the Record-Standby Mode Continues Shooting OperationFunction/Initial Setting Header REC Function„ How to set the Header REC menu screen Playback Mode Playback ProcedureFast-Forward, Rewind SearchOutputting Audio MIXStereo Monitor PB Audio CH DVUsing External Components Connecting the Video Signal Cables„ Connecting the IEEE1394 Cable „ Displaying AlarmsDubbing with AV Devices HDV/DV Dubbing OFF „ Settings Backup Recording„ Operation Menu Screen Configuration Menu ScreensSetting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo Format Menu Screen Connector G Unconnected Connected Output Signal Initial settings U model 7.5% E model 0.0%Native Auto3200K Camera Operation Menu ScreenOFF Camera Process 1/2 Menu Screen MiddleHigh NormalCamera Process 2/2 Menu Screen 108%Advanced Process Menu Screen StandardSkin Color Adjust Menu Screen Color Matrix Adjust Menu ScreenStop Switch Mode Menu Screen REC Item Setting for Step Setting for VariableStep NoneAUDIO/MIC 1/2 Menu Screen 20dB50dB 48KMIX AUDIO/MIC 2/2 Menu ScreenCH1/2 70-80% LCD/VF 1/3 Menu ScreenBlue LCD/VF 2/3 Menu Screen VoltageLCD/VF 3/3 Menu Screen ColorExecute TC/UB/CLOCK Menu ScreenDrop Disable Header REC Menu ScreenTIME/DATE Menu Screen BARS+CAMDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY3MIN Others 1/2 Menu ScreenBlink Others 2/2 Menu Screen 1394Menu ALL Reset Others 2/2 Menu Screen Cont’dDR-HD100 A.OFF Drum HourFile Manage Menu Screen „ Loading a menu settings file„ Displaying the File Manage menu Screen „ Error displays „ Saving settingsFile Manage Menu Screen Cont’d „ Resetting the menu settings to the fac Tory settings „ Initializing formatting an SD memory CardHow to Use Skin Detail Features of the Camera Section„ Setting the skin detail function color and range Features of the Camera Section „ Using the Skin Detail FunctionOutputting color bars Others Display Status ActionError Code Error Details GY-HD110 Operation Remedy Blinking Pattern Remaining Battery/Tape Viewfinder ScreenTroubleshooting Symptoms RemedyHow to Display the Hour Meter Information for Users on Disposal of Old EquipmentEuropean Union Business users Other Countries outside the European UnionSpecifications Accessories