JVC LYT0191-001B Access System Menu, Select Snapshot Mode, Take Snapshot, Menu buton Display

28ENRECORDING

AdvancedFeatures(Cont.)

Snapshot

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

Lock button

SNAPSHOT button

Select Dial

5S
M	OFF Y
A		P
		AL

Power Dial

MENU buton

Display

PHOTO

During snapshot

REC MODE	SP
WIDE MODE	OFF
ZOOM	40X
DIS	ON
GAIN UP	AGC

TO DATE / TIME MENU

4TO SYSTEM MENU

END

Recording Menu

PHOTO MODE	FRAME
SCENE	5S
BEEP / TALLY	ON
WIND CUT	OFF
SOUND MODE	32kHz
ID NUMBER	06
DEMO. MODE	OFF

4RETURN

System Menu

SELECT OPERATION MODE
1 First turn the Power Dial to “	M	” while pressing

down the lock button located on the dial. Make sure the viewfinder is pulled out or the LCD monitor is open fully.

2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.

3 ACCESS SYSTEM MENU

Move the pointer and highlight bar to “TO SYSTEM MENU” by rotating the Select Dial. Press it and the System Menu appears.

4 SELECT SNAPSHOT MODE

Move the pointer and highlight bar to “PHOTO MODE” by rotating the Select Dial. Press it and choose the appropriate mode among the five Snapshot modes (☞ pg. 29) by rotating it. Stop when the one you want is displayed and press it again. The pointer and highlight bar automatically move to “RETURN”. Press the Select Dial twice. Selection is complete and the menu disappears.

5 TAKE SNAPSHOT

Press the SNAPSHOT Button.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.