JVC LYT0191-001B specifications Charging The Battery Pack

8EN

GETTINGSTARTED

Charging The Battery Pack

The battery pack has not been charged at the factory. Before using it, be sure to charge it with the AC Charger Station.

ATTACH DETACH

Battery pack

BN-V607U

To AC outlet

Power cord

Power cord

AC Charger Station

AA-V60EK or

AA-V60EA

Charger indicator

DC OUT jack Power lamp

SUPPLY POWER TO CHARGER
1 Plug the AC Charger Station’s power cord in to
an AC outlet. The power lamp comes on.
ATTACH BATTERY
2 Attach while making sure the	marks are

facing down and aligned with the correspond- ing marks on the AC Charger Station.

•The Charger Indicator begins blinking to indicate charging has started.

3 CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

4 DETACH BATTERY

Slide the battery in the direction of the arrow and lift off.

•Remember to unplug the AC Charger Station’s power cord from an AC outlet.

Battery	Approximate charging time
BN-V607U	90 min.
BN-V615U	180 min.
(optional)

NOTES:

●If you connect the camcorder’s DC cord to the AC Charger Station during battery charging, power is

supplied to the camcorder and charging stops (☞ pg. 10).

●When using the AC Charger Station, be sure to use the supplied power cord only.

●When charging the Battery Pack for the first time or after a long storage period, the Charger Indicator may not light. In this case, remove the Battery Pack from the AC Charger Station, then try charging again.

●Since the AC Charger Station processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

INFORMATION:

The AC Charger Station (provided) enables you to charge not only one battery pack but also one battery pack installed in the camcorder (☞ pg. 55).