JVC LYT0191-001B VCR/TV Connection when connecting directly to the camcorder, Turn on Power

54ENPLAYBACKBasicConnections

VCR/TV Connection (when connecting directly to the camcorder)

Please refer to your VCR and/or TV instruction manual(s) when connecting.

		Cable adapter (provided
		only with U.K. models)
Connector is		If your TV or VCR has the
		21-pin AV input connector		TV
under the cover.		(SCART), use the provided
		cable adapter.
		To AUDIO IN
		connector (L/R)
		White to AUDIO L		To
				TV or VCR
To AV OUT	VIDEO/AUDIO	Red to AUDIO R
connector				VCR
	cable (provided)	Yellow to VIDEO
		To VIDEO IN
		connector	VIDEO OUT select
			switch (Set to CVBS)

1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 CONNECT CAMCORDER TO TV OR VCR Pull out the connector cover and open it. Connect as shown in the illustration above.

If Using A VCR . . . go to step 3.

If not . . . go to step 4.

3 CONNECT VCR OUTPUT TO TV INPUT Refer to your VCR’s instruction manual.

4 TURN ON POWER

Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.

5 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 52).

• Playback Sound Mode Display

.... set the Power Dial to “ M ”, press the MENU

button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●It is recommended to use the AC Charger Station

as the power supply instead of the battery pack. (☞ pg. 10)

●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT connector.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder's display from appearing on the TV screen during playback, press the IND. ON/OFF button for longer than 1 second.

●While the VIDEO/AUDIO cable is connected to the AV OUT connector, sound cannot be heard from the speaker.