JVC LYT0191-001B specifications Connect AC Charger Station to TV or VCR

3

EN57

Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

		Yellow: VIDEO
		White: AUDIO L			TV
		Red: AUDIO R
To AUDIO OUT				To AUDIO IN
connectors (L/R)
				connectors (L/R)
Red		VIDEO/AUDIO		White	To
		cable (provided)
				Red	TV or VCR
White	Core filter
Yellow				Yellow
	connect when the S-VIDEO
To VIDEO OUT				To VIDEO IN
	(cable is not used		)		VCR
connector				connector
To S-VIDEO OUT		S-VIDEO cable		To S-VIDEO IN
connector	Core filter	(provided)		connector

1 CONNECT AC CHARGER STATION TO TV OR VCR

Connect as shown in the illustration 1, 2 or 3 (☞ pg. 56, 57).

If Using A VCR . . . go to step 2.

If not . . . go to step 3.

2 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

3 TURN ON POWER

4 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 52).

• Playback Sound Mode Display

.... set the Power Dial to “ M ”, press the MENU

button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●Never connect any VIDEO/AUDIO cable or S- VIDEO cable other than those provided to the AC Charger Station’s connectors.

●When using the provided VIDEO/AUDIO cable, S-VIDEO cable or editing cable, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder's display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.

●For customers in the U.K.; Set the VIDEO OUT select switch of the cable adapter as required: Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.