JVC LYT0191-001B specifications AE/Effects, Disable P.AE/EFFECT

EN41

P.AE/Effects

IMPORTANT:

If certain Fades or Wipes (☞ pg. 39, 40) are activated, some P.AE/Effects cannot be used. If you select a P.AE/Effect that is unusable in the current situation, the effect’s symbol begins flashing.

You can choose any one of the effects (☞ pg. 42) from the P.AE/Effect Menu.

FOCUS	AUTO
EXPOSURE	AUTO
W. BALANCE	AUTO
FADER	OFF
/ WIPE
4P. AE	OFF
/ EFFECT

RETURN

Manual Mode Item Menu

Display
P. AE / EFFECT
1	SLOW X4
2	SLOW X10
	OFF
SEL. 41/50	SHUTTER 1/50
1/100	SHUTTER 1/100
1/250	SHUTTER 1/250
1/500	SHUTTER 1/500

P.AE/EFFECT Menu

1/50 PAUSE

The indicator for the selected mode appears, and the selected mode is engaged.

Select Dial

5S
M	OFF
A

YALP

Lock button

Power Dial

SELECT OPERATION MODE
1 First turn the Power Dial to “	M	” while pressing

down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM

Press the Select Dial and move the pointer and highlight bar to "P.AE/EFFECT" by rotating the Select Dial.

3 ACCESS P.AE/EFFECT SELECT MENU Press the Select Dial. The P.AE/Effect Menu appears.

4 SELECT EFFECT

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

•The P.AE/Effect Menu disappears and the selected mode is activated. The symbol of the selected mode appears.

5 START RECORDING

Press START/STOP. The image begins with the selected effect.

6 DISABLE P.AE/EFFECT

To turn off the selected effect, re-access the P.AE/Effect Menu and move the pointer and highlight bar to “OFF” by rotating the Select Dial. Then press it.

NOTE:

P.AE/Effects can be changed during recording or during Record-Standby.