Kenwood KR-V888D 4Adjust the volume levels of each speaker, Enter the speaker distance

Page 17

 

Preparing for surround sound

 

 

 

KR-V888D (En/T)

4Adjust the volume levels of each speaker.

1 7

Listen to the test tone and adjust the volume level of each speaker so that they all produce the test tone at the same volume level.

SET UP

 

 

 

MAIN

3

 

 

 

 

 

SP.SLCT

SP.LVL

SP.DIST

INLVL

 

 

 

 

SPEAKER

 

 

 

 

LEVEL

 

 

 

 

 

TEST TONE

 

 

 

 

AUTO

 

 

 

 

MANUAL

1

L =

0dB

OFF

 

 

 

2

 

 

 

 

 

1Select the test tone type.

AUTO : The test tone switches between each speaker in regular intervals.

MANUAL : The test tone only comes from the selected speaker (displayed in blue).

OFF

: Stops the test tone.

2 Adjust the Volume level of each speaker.

1Listen to the test tone and select the speaker you want to adjust.

•The selected speaker icon turns blue and the speaker name and level appear (at the bottom of the screen) to show that it can be adjusted.

2Listen to the test tone and adjust the volume level of the speaker (± 10 dB) using the TUNING/SKIP keys on the remote control.

TUNING/SKIP – : Lowers the volume TUNING/SKIP + : Raises the volume

• Adjust the subwoofer as you desire.

3Continue to the SP.DIST (speaker distance) screen.

Preparations

5Enter the speaker distance.

Enter the distance from your listening position to the front (left or right), center, and rear (left or right) speakers. If both front (or rear) speakers are not the same distance from the listening position, enter the distance to the closest speaker.

 

 

 

 

 

 

 

 

 

1

SET UP

 

 

 

 

 

 

MAIN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

SP.SLCT

SP.LVL

SP.DIST

 

INLVL

 

2

 

 

 

 

 

 

 

 

 

SPEAKER

DISTANCE

 

FRONT

1

 

 

CENTER

3

 

SURR.

 

10ft

3. 0m

 

 

Select the speaker.

The speaker name turns blue. An arrow icon appears to indicate the selected speaker.

Enter the speaker distance.

Use TUNING/SKIP on the remote control to select the appropriate distance.

The distance is adjustable from 0.0meters (0 feet) to 9.0meters (30 feet) in 0.3meter (1 foot) steps.

Continue to the IN LVL (input level) screen.

6Adjust the audio input level of the connected components.

The LEVEL INDICATOR lights during playback if the signal being input from an analog source is too large. If this occurs, use this screen to attenuate the input level for that source.

SET UP

 

MAIN

 

 

 

 

 

 

 

SP.SLCT

SP.LVL

SP.DIST

 

INLVL

INPUT LEVEL

SELECTOR: TUNER

LEVEL

:

0dB

1Select the input.

1Use TUNING/SKIP on the remote control to select the desired input.

2 Move the pointer downward.

 

2 Select an input level.

1

The input level is adjustable in 3 levels. Use TUNING/SKIP on the remote control to select the

 

smallest level required to extinguish the LEVEL INDICATOR (normally, set to 0 dB).

2

0 dB ï –3 dB ï –6 dB

• Input level adjustment is not possible when using the AUX.6CH INPUT or ADAPTOR jacks.

3 Press the SETUP key on the remote to turn off the on-screen display.

4Press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD remote control mode.

This completes the surround setup.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents KR-V888D About the supplied remote controlAccessories Safety precautionsGetting started UnpackingContents True home theater sound Special featuresUniversal IR InfraRed remote control Special features How to use this manualRDS Radio Data System tuner New Traitr transistor adopted in the final stageNames and functions of parts About the Standby indicatorNames and functions of parts Connecting the antennas Setting up the systemMicrocomputer malfunction Connecting audio components6CH input M.INPUT System Control jacksSetting up the system Connecting video componentsAC-3 RF Demodulator DEM-999D Digital connectionsRegistering setup codes for Kenwood audio components Connecting the system controlSpeaker impedance Connecting the speakersPRE OUT connections Preparing the remote controlLoading the batteries Operating distancePress the Sound or Setup key Using the on-screen displayTo quit the OSD mode Move the pointerSpeaker placement Surround set upPreparing for surround sound Select the speakers and enter the speaker distanceEnter the speaker distance 4Adjust the volume levels of each speakerAdjust the audio input level of the connected components Listening to a source component Normal playbackAdjusting the sound Source Direct playback Listening with headphonesListening with a graphic equalizer 6CH.INPUT playbackSet the Input Selector to Video SecondsRecording audio RecordingRecording video Recording a music sourceSelect a tuning method Tuning non-RDSradio stationsSet the input to tuner Select a broadcast bandListening to radio broadcasts Tuning radio stations by frequency Direct tuning3Enter the frequency Press the Direct keyRDS functions Using the Display keyReceiving preset RDS stations Presetting RDS stations RDS Auto MemorySet the broadcast band to FM Store the stations automaticallyReceiving preset stations in order P.CALL Presetting radio stations manuallyEnter a preset number 1~40 For 15, press For 20, pressSelect the program type you desire Tuning by program type PTY searchActivate the PTY search mode Example Searching for a Rock Music broadcast To select another program typeStart the search Reserving the desired information Tune to a preset RDS stationPreparation Stations RDS Auto MemoryWhen listening to the tuner To cancel EON reservationTurn the TA, News and INFO. indicators off TP Traffic Program indicationSound modes Ambience effectsDolby Digital AC-3 Dolby Pro LogicAmbience effects DSP modeWhats DSP? Surround Play Select a surround modePreparations Source Direct S.DIRConvenient functions To select a DSP modeTo adjust the DSP modes Source Direct switch OSD switchSET UP switch Radio Text switchKR-V888D En/T Registering setup codes for other components Getting the most from your remote controlFind the setup code of the component to be registered Low battery warning8Once setup codes have been entered for all Enter the setup codePress the ENT key to store the code you have just input 7Repeat steps 3 to 6 to register additionalVideo key Audio key TV key Operating other componentsPress the operation keys you desire VIDEO1 VCR CD CD TV1 VIDEO2 VCRPress Shift Changing confirming the operation modeSelect the component to be controlled Execute the desired operationsPerform each of the following steps within 5 seconds Make a plan of the macro play you want to set upActivate the macro program mode Terminate the macro program mode Select where the macro should be storedPress the keys to be operated in order Repeat steps 1 through 5 to program up to 3 macrosExecute the macro play Executing an automatic operationPress the Macro key Deleting a setup code Setup code correlationChecking a setup code Perform each step within 5 secondsEnter the 3 digit code Hold down the ENT key until the backlight flashes twiceUK including N. Ireland Go to within 5 secondsPress a numeric key Code selection after mode downloadHold your remote to the speaker portion of your telephone VCR Set up codes Set up code chartMaker Set up codes Non-IR codesVCR Set up codes Set up code chartBPL TV Set up codesLD player Set up codes Satellite Set up codesDSS Set up codes DVD Set up codesCD Player Set up codes Cable Set up codesCassette deck Set up codes DAT deck Set up codesMD Set up codes Misc. audio Set up codesCase of difficulty Resetting the MicrocomputerAmplifier TunerMemory back up function Remote control unitCase of difficulty Specifications Tuner operations Remote operation of other componentsMD recorder operations VCR operations TV operationsLD player operations Satellite tuner operationsCable tuner operations Function Shift commands Menu Menu Theme ThemeDVD player operations + Channel + Select Numeric keysFor your records
Top Page Image Contents