l
l
l
If you experience problems during rnstallatron, consult your Kenwood dealer.
If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer
Press the reset button if the DISC auto changer fails to operate correctly. Normal operatin should be restored.
Cleaning the Faceplate Terminals
If the terminals on the unrt or faceplate get dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit IS stained, wipe It with a dry soft cloth such as a silicon cloth
If the faceplate IS stained badly, wipe the starn off wrth a cloth moistened with neutral cleaner, then wipe neutral detergent off.
Applyrng spray cleaner drrectly to the unrt may
Aaffect Its tnechanrcalparts Wrprngthe faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters
Lens Fogging
Right after you turn on the car heater in cold weather, dew or condensation may form on the lens In the CD player of the unit. Called lens fogging, CDs may be rmpossrble to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whrle, consult your Kenwood dealer.
l
l
Reset button
Characters in the LCD may become difficult to read In temperatures below 41 “F (5 “Cl.
The illustratrons of the drsplay and the panel appearing in thus manual are examples used to explarn more clearly how the controls are used. Therefore, what appears on the drsplay In the rllustratrons may doffer from what appears on the display on the actual equipment, and some of the illustrations on the drsplay may represent something rmpossrble in actual operation.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot, clean It every once in a while. Your CDs can get scratched If you put them rn a dusty CD slot.