Panasonic AJ-HDC27V, AJ- P When using a wireless microphone, When connecting audio components

Audio input preparation

When using a wireless microphone

Attach the WX-RJ700 wireless receiver when Panasonic’s wireless system is to be used.

1	Attach the WX-RJ700 wireless receiver to the WX-
	ZJ770 camera attachment.
2	Align the grooves in the camera attachment with

the pins on the battery case, etc. to attach the wireless receiver.

Audio output connectors

WX-RJ700 wireless receiver

WX-ZJ770 camera attachment

XLR cable

		AUDIO IN connectors
	AUDIO IN switches
3		Connect the AUDIO IN connectors on the camera
		with the wireless receiver using the XLR cable.
4		Set the AUDIO IN switch or switches for the
		channel or channels to which the XLR cable has
		been connected to “REAR.”
5		Set the LINE/MIC/+48V selector switch on the rear
		panel to “MIC.”
		When detaching the wireless receiver, push up
		the lever on the bottom panel of the camera
		attachment to disengage it.

<Note>

For details on the operations and other aspects of the WX-RJ700 wireless receiver, refer to the operating instructions which accompany the receiver.

When connecting audio components

1 Connect the AUDIO IN connectors on the camera with the audio component using the XLR cable.

AUDIO IN connectors

2 Set the AUDIO IN switch or switches for the channel or channels to which the microphone or microphones have been connected to “REAR.”

3 Set the LINE/MIC/+48V selector switch on the rear panel to “LINE.”

LINE/MIC/+48V selector switch

AUDIO IN switches

34