Panasonic AJ- P, AJ-HDC27V Attaching the rain cover, Connecting the extension control unit

Page 37

Attaching the rain cover

Example showing use of the SHAN-

RC700 rain cover

Tighten the cord.

Close using the fastener.

Close using the fastener.

Connecting the extension control unit

By connecting the AJ-EC3 extension control unit (optional accessory), some of the functions can be operated by remote control.

When the AJ-EC3 is connected and the POWER switches on the unit and AJ-EC3 are set to ON, the unit is automatically set to the remote control mode.

Dedicated cable

AJ-

6 5

1

<Notes>

OBefore connecting or disconnecting the dedicated cable, be absolutely sure to set the POWER switches on the unit and AJ-EC3 to OFF.

OWhen “OFF” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen

of CAM MENU, all the adjustments and settings made using the AJ-EC3 will be cleared when the unit’s power switch is set to OFF. Neither is it possible to save these adjustments and settings on

a setup card.

However, the menu item settings can be saved on a setup card.

When the AJ-EC3 is connected again, its settings will be restored.

OWhen “ON” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen

of CAM MENU, all the adjustments and settings made using the AJ-EC3 will not be cleared even when the unit’s power switch is set to OFF.

ECU connector

AJ-EC3

37

Image 37
Contents Operating Instructions Risk of Electric Shock Do not Open Indicates safety informationContents Maintenance Error codesSpecifications Emergency ejectFeatures of the camera unit FeaturesIntroduction Automatic aperture reference value finely adjusted Piece filter disc sets available as standard accessoriesGeneration of color bar signals and reference audio signals Remote controlFeatures of the VTR unit FUJINON/CANON System ConfigurationSHAN-RC700 AJ-HP23LP AJ-CL12LP AJ-HP32LP AJ-HP46LPParts and their functions Power supply section1MIC in microphone input jack XLR, 3-pin Audio function section2AUDIO Level CH1/CH2 audio channel 1 LevelAlarm warning alarm volume adjustment control DC OUT DC power output socketMonitor volume adjustment control = Monitor Select audio channel selector SwitchViewfinder section Synchro scan adjustment switches $ Control settings and filter selection$ Examples of filter selection White BAL white balance memory selectorGain gain selector switch $ OUTPUT/AUTO Knee switch setting positionThis is set to on when the electronic shutter is to Shooting recording/playback function section Shutter switchECU Remote remote control connector 6- pin HD SDI OUT connector BNCCharacter switch Shooting recording/playback function section SDI switch= VTR SAVE/STBY tape protection switch VTR Start buttonShooting recording/playback function section Mode Check button? User 1 and User 2 buttons @ Eject buttonLight switch Back tally switchBack tally lamp unit Display windowTime code related section Menu operation sectionDisplay switch Reset buttonTCG time code selector switch Hold buttonUsing the Anton/Bauer battery pack Power supplyAttach the battery pack OPanasonic OAnton/Bauer OSonyUsing the Panasonic AU-BP402 battery pack Using the Sony BP-90 battery pack Using the Sony NP-1 battery packDetach the battery mount SeeWhen the AJ-B75 AC adapter is used Using an AC power supplyPin no Signal Mount cap Attaching the lensMark Lens socketAdjustment method Adjusting the lens flangeTo L 0 dB Adjusting the white shadingShoot a sheet of white paper devoid of color irregularities Always be sure to leave the electronic shutter at OFFSwitch White shading adjustment is now completeExtender function, and repeat steps Repeat stepViewfinder is an optional accessory Adjusting the viewfinderAttaching the viewfinder Detaching the viewfinderLock Adjusting the viewfinder positionLever Viewfinder Open the mic holder Audio input preparationAttach the microphone, and tighten the locking screw AJ-HVF27PRemove the screws used to attach the mic holder Attaching the AJ-MH700P mic holder optional accessoryScrews provided with mic holder Locking screwAudio in connectors When connecting a microphone to the MIC in jackWhen connecting audio components When using a wireless microphoneAttach the tripod attachment to the tripod Mounting the unit on a tripodTripod attachment Grooves until it clicks into placeBottom section Attaching the shoulder strapCheck that the shoulder strap is securely fastened Shoulder strapAttaching the rain cover Connecting the extension control unitExample showing use of the Shan RC700 rain cover VTR Save VTR power-saving lamp Batt battery lampViewfinder lamp displays TALLY/REC recording lampSetting item Description of setting SettingSteps Other itemsViewfinder screen status displays Safety zone markers Battery voltage display@ Master gain setting display Color temperature display PRE/A/BOn the VTR VF Indicator screen of VTR Menu On the VF Indicator screen of CAM MenuSelecting the display items Selectable itemsSetting change/adjustment result messages and display modes Display modes and setting change messagesOn the VF Indicator screen MessageSetting the marker displays Switching the display modeSetting the camera ID Screen displays Displays relating to errors and warningsDisplays relating to time codes Dial button to select Adjusting the date and timeJOG dial button Adjusting the white balance Adjusting the white balance and black balanceSequence AWB white balance adjustment Set the switches as shown in the figureSet the Auto W/B BAL switch to AWB, and then Adjust the lens apertureRelease it ModeMessages relating to white balance adjustment When there is no time to adjust the white balanceWhite balance memories White balance search areaFilter B is restored When Filter INH is set to onExample of display Auto W/B switch Adjusting the black balanceAperture is automatically set to Close Output CAMSetting the shutter mode and speed Setting the electronic shutterShutter modes Available shutter modes and shutter speedsOn the Shutter Speed screen of CAM MENU, Setting the synchro scan modeVariable frame rate Setting the frame rateScan reverse Setting the scan reversePress the JOG dial button, and set the desired scan reverse Manual audio level adjustments Adjusting the audio levelFactory setting is OFF LimiterSetting the user’s bit Setting the time dataX x 2 4 0 Time code when the battery is replaced Setting the time codeWhen locking to an external signal User’s bit setting when the time code is externally lockedExternally locking the time code RespectivelyUser data operation How to use the user dataSaving the user data Loading the user dataHow to insert the setup card Setup card operationsHow to eject the setup card Error message Remedial action Formatting the setup cardCAM Main Menu To exit the menuGive a title to the selected file Select the file NoFormat Error When the data saving isREAD/WRITE screen, and perform steps Load the data of the selected file Loading the data saved on the cardTo load the VTR unit’s data, open the VTR Card Read NGLoading a cassette tape Cassette tapesEjecting the cassette tape To prevent accidental erasureRecording Shooting When adjusting the white balance on the spotSelect the filter to match the lighting conditions Tape function buttonsDuring rec-pause Scene-to-scene continuityLens RET button functions PlaybackRec review Color playbackNews REC function Other VTR functionsRetake function Interval REC intermittent recording functionUser menu Menu operationsEngineer menu Display methodUser menu Displaying menusEngineer menu Press the Menu buttonExample To the user menuItems indicated with Setting menu configurationCAM Main Menu LED Camera SW Mode VF Diaplsy VF Marker VF IndicatorShutter White Preset Extender Filter Black STR F16 ADJResolution Detail Modulation Resolution Sensitivity DetailDetection Correct DIG ROPVTR Main Menu CAM Main Menu 1 screen Setting menu screensCAM Main Menu 2 screen CAM Main Menu 3 screenMatrix screen ROP screenROP Remote Operation Panel is set on this screen Camera matrix is set on this screenColor Correction 1 screen Phase ENGColor Correction 2 screen SAT UserMID Setting screen LOW Setting screenLow level gain is set on this screen Middle level gain is set on this screenAdditional DTL 1 screen High Setting screenAdditional DTL2 screen High level gain is set on this screenSkin Tone DTL screen Knee settings of the camera are performed on this screenKNEE/LEVEL screen Set on thisGamma settings of the camera are performed on this screen Camera Setting screenGamma screen Detail UserVF Marker screen VF Display screenVariable Remarks Range Camera ID screen VF Indicator screenCamera ID is set on this screen IrisLED screen Shutter Speed screenShutter speed is set on this screen Viewfinder is set to on or OFF on this screenFrame Mode screen Camera SW Mode screenModes of the camera switches are set on this screen Super Gain screenCAM Card R/W Select screen CAM Card READ/WRITE screenExample GENLOCK/IRIS screen Lens adjustments are performed on this screenLens ADJ screen CAM User Menu Select 1 screen CAM User Menu Select 1, 2 and 3 screensCAM User Menu Select 2 screen CAM User Menu Select 3 screenFlare screen Black Shading screenWhite Shading screen Colorimetry screenInitialize screen Diagnostic screenEvaluation screen Option screenOS/N measurement screen OResolution measurement screenOModulation measurement screen OSensitivity measurement screenVTR Main Menu screen VTR’s functions are set on this screen Function screen2.0 ALLPRO14 BATTERY/TAPE screenTRIM14 TRIM13¢ on Battery Setting screenAuto MIC/AUDIO screen VTR VF Indicator screenCH1/2 101TC/UB screen OFF LCD User 103Display OFF ENG TCG/TCR ENGTime Date screen Time/date settings are performed on this screenVTR Initialize screen VTR User Menu Select screenNews REC ENG Pause Timer ENGHumid OPE ENG REC Start ENGTC Mode ENG PowerUB Mode ENG Tape IND ENG107 Also by warning tones heard from the speaker or earphone108 Emergency eject Error codesReplacing the backup battery MaintenanceHead cleaning Cleaning inside the viewfinderPreparation for inspection Inspections prior to shootingInspecting the camera unit VTR SAVE/STBYInspecting the viewfinder Tape travel inspection Inspecting the VTR unitManual audio level adjustment function inspection Inspection using external microphonesInspections relating to the time code and user’s bit Specifications VTR Video System Connector SectionVTR Audio System VTR Tape Transport SystemMaintenance products Relating to power supplyViewfinder Relating to external VTRsVQT9419 F0601W @

AJ- P, AJ-HDC27V specifications

The Panasonic AJ-HDC27V and AJ-P series are advanced broadcast-quality cameras that cater to the professional video production industry. Designed with cutting-edge technologies, these cameras are ideal for documentaries, live events, and cinematic projects.

One of the standout features of the AJ-HDC27V is its high-definition capabilities. The camera supports various HD formats, including 720p and 1080i, allowing for flexible resolutions tailored to different production needs. With a 3CCD sensor configuration, the AJ-HDC27V captures stunningly vivid colors and exceptional image clarity, which are critical for professional productions. This sensor setup ensures high sensitivity and low noise, making it suitable for shooting in diverse lighting conditions.

The AJ-P series introduces the innovative P2 card technology, which significantly enhances workflow efficiency. The P2 card system offers high-speed data transfer and reliable storage options. With multiple card slots, it's possible to shoot for extended periods without interruption, as footage can be recorded simultaneously across multiple cards. This feature minimizes downtime, allowing production teams to maintain momentum during critical shooting schedules.

In terms of connectivity, both the AJ-HDC27V and AJ-P models boast a variety of professional-grade interfaces, including HDMI, SDI, and FireWire. These options provide versatile connectivity for various external devices and facilitate seamless integration into existing production systems. Additionally, the cameras support real-time HD image transmission, making them ideal for live broadcasting.

The ergonomic design of the AJ-HDC27V and AJ-P series ensures comfortable handling during extended shooting sessions. The cameras are equipped with user-friendly controls and customizable settings, allowing operators to fine-tune their shooting experience. Features such as focus assist, waveform monitor, and peaking functions empower videographers to achieve precise shots.

Moreover, both camera lines support advanced video compression formats, including AVC-Intra and DVCPRO HD. This ensures high-quality recordings with manageable file sizes, optimizing storage and editing workflows. The AJ-P series also includes built-in scene file settings, enabling quick adjustments for various shooting environments.

In summary, the Panasonic AJ-HDC27V and AJ-P series offer professionals in the video production industry state-of-the-art technology and versatile features that enhance the shooting experience. With their exceptional imaging capabilities, efficient storage solutions, and user-friendly design, these cameras are a reliable choice for delivering high-quality visual storytelling.