Panasonic AJ-HDC27V When the data saving is, READ/WRITE screen, and perform steps, Format Error

Setup card operations

Give a title to the selected file.

9 Turn the JOG dial button to move the arrow (cursor) to the WRITE item.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

nWRITE CARD CONFIG READ USER DATA

TITLE :

10	When the JOG dial	button is pressed, the
	following message appears.
	< CAM CARD READ/WRITE >
	READ
	SELECT	:1
	WRITE
	SELECT	:1
	CARD CONFIG
	READ USER DATA
	TITLE	:

WRITE ?

YES

nNO

TITLE :

11	Turn the JOG dial button to	move the arrow
	(cursor) to YES, and press the JOG dial button.
	When the data saving is	completed, the
	following message appears.

< CAM CARD READ/WRITE >

READ

SELECT :1

WRITE

SELECT :1

CARD CONFIG

READ USER DATA

TITLE :

WRITE OK

YES

nNO

TITLE :

To save the VTR unit’s data, open the VTR CARD	9 to 11 .
READ/WRITE screen, and perform steps

If one of the following messages appears when the JOG dial button is pressed, the data cannot be saved.

	Error message		Remedial action
WRITE NG			Insert the card.
NO CARD
(setup card has not been
inserted)
WRITE NG			The card was formatted by a
FORMAT ERROR			device other than the unit.
(formatting error)			Replace the card.
WRITE NG			The card may be defective.
ERROR			Replace it.
(the data cannot be saved)
12	Press the MENU button	to exit the menu

operations.

The setting menu is cleared, and the display showing the unit’s current statuses appears at the top and bottom of the viewfinder screen.

64